DCS WOUD230, WOU130 Care and cleaning, Removing and replacing the sliding shelves and side racks

Page 32

US CA

30

Care and cleaning

Removing and replacing the sliding shelves and side racks

1To remove a sliding shelf, grip it by its two front corners (making sure you are gripping the wire shelf and the sliding frame together), tilt upwards and pull it out of the oven.

2

To remove the side racks, gently push the retaining wire from underneath the lock stud, then

 

swing the lowest edge of the side rack up and out towards the center of the oven until the rack

 

is almost horizontal. The prongs at the top will slide out

Mounting slots

 

of the mounting slots.

 

 

 

 

3

To replace the side racks, hold them almost horizontally

 

 

and locate the prongs into the small mounting slots at the

 

 

top of the oven cavity. While you are doing this, support

 

 

the rack with your hand from underneath, to ensure that

 

 

both prongs perfectly locate into the mounting slots.

 

4

Lower the side racks carefully and gently place the

 

 

retaining wire underneath the lock stud.

Lock stud

 

 

Important!

 

 

Retaining wire

 

 

Do not lower side racks until the prongs are fully

 

 

inserted into the slots so that you do not chip the porcelain enamel.

Manual cleaning and maintenance

Important!

Do not use harsh/abrasive cleaning agents, waxes, scourers, sharp metal scrapers, polishes or commercial oven cleaners to clean your oven, as these will permanently damage the surfaces. If you choose to use a stainless steel cleaner, please read the label to make sure it does not contain chlorine compounds. These are corrosive and may damage your oven’s appearance. Clean the stainless steel surfaces in the same direction as the grain, in a horizontal motion.

Do not clean or use any oven cleaning products on the door seal or cavity seals (gaskets). Do not rub, damage or move the seals, as they ensure that the oven seals properly and thus operates efficiently.

Cleaning the control panel and the stainless steel surfaces

It may be useful to lock the oven controls before cleaning - see ‘How to lock the control panel’ in ‘User preference settings’ for details.

Wipe with a clean damp cloth and dry with a lint-free cloth.

To reduce marks like fingerprints, use a stainless steel cleaner regularly.

Do not use scourers or other abrasive cleaners as they will permanently damage the surface.

Cleaning the exterior surface of the glass door

Use a mild solution of detergent and warm water; use a glass cleaner to remove smears and fingerprints.

Dry with a soft lint-free cloth.

Do not use sharp metal scrapers to clean the oven door glass.

Note: the interior oven door glass will be cleaned during a self-clean cycle.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents User guide Guide d’utilisation Page Contents Safety and warnings OperationImportant safety instructions US CA Introduction About your new ovenTo set the clock Using your oven before you startSetting the clock Using the oven controls TimerOven Modes Cooling fan Broil upper inner elementMaxi Broil upper inner and outer elements Conv Broil fan plus upper inner and outer elementsTo position the shelves Using your ovenPositioning the shelves Choosing the right bakeware US CASelecting mode and temperature Preheating your ovenUsing the oven modes Baking Roasting BroilingTips for dehydrating fruit Tips for proofing breadUsing the meat probe Temperature knobs to OFFTips for using the meat probe When automatic cooking is set When automatic cooking has finishedAutomatic cooking To set automatic time cookingWhen automatic stop cooking is set When automatic stop cooking has finishedCanceling automatic cooking Automatic stop cookingCooking guidelines BakingRoasting BroilingShelf Temp F Temp C Time min BakingConv Bake Bake Shelf Single multi Temp F Temp C Time min BakingShelf Temp F Temp C Time min Baking Conv PastryPastry Bake Shelf Broil setting Time min Beef LambPork SausagesChicken Conv BroilShelf Temp F Temp C Time min Beef Roasting meat Oven Probe Per lb Shelf Temp F Temp F Temp C 450 g Best ModeCooking guidelines 29 US Care and cleaning Manual cleaning and maintenanceCleaning the control panel and the stainless steel surfaces Cleaning the exterior surface of the glass doorCare and cleaning 31 US Cleaning the porcelain enamel surfacesCleaning the sliding shelves Cleaning the broil/roast system and side racksSelf Clean mode Using the Self Clean modeTo cancel the Self Clean mode before it has finished Short self-clean cycleSelf-clean delayed start RotateUser preference settings User Select modeUser preference settings 35 US How to change the language How to reset the ovenHow to lock the control panel To lock the control panelTroubleshooting TroubleshootingFault codes Oven door will not Product details Warranty and serviceBefore you call for service or assistance CA FR Conserver CES Instructions 42 Sécurité et mises en garde FonctionnementImportantes consignes de sécurité Sécurité et mises en garde44 Sécurité et mises en garde Propos du nouveau four Pour mettre l’horloge à l’heure Utilisation du four avant de commencerRéglage de l’horloge Utilisation des commandes du four MinuteurBouton de sélection de la cavité du four Pour régler le minuteurModes de four Aero Pure ventilateur et élément chauffant du ventilateurCuisso Normal éléments chauffants supérieur et inférieur Aero Gateau ventilateur et élément chauffant inférieurVentilateur de refroidissement Gril élément chauffant intérieur supérieurPositionnement des grilles Utilisation du fourPositionnement des grilles Sélection des plats allant au four adéquats Sélection de mode et de température Préchauffage du fourUtilisation des modes du four Cuisson Rôtissage GrilConseils pour déshydrater les fruits Conseils pour l’apprêt du painUtilisation de la sonde thermique Aero Gril ne nécessitent pas de préchauffageConseils quant à l’utilisation de la sonde thermique Cuisson automatique Pour régler la cuisson à durée automatiqueLorsque la cuisson automatique est programmée Lorsque la cuisson automatique est terminéeCuisson à arrêt automatique Pour régler la cuisson à arrêt automatiqueLorsque la cuisson à arrêt automatique est programmée Lorsque la cuisson à arrêt automatique est terminéeDirectives de cuisson Rôtissage GrilSimple Temps Multiple Temp F Temp C Minutes Cuisson Aero PureGrille Cuisso Aero Simple Temps Multiple Temp F Temp CCuisso Normal Aero Gateau Cuisso GateauGrille Temp F Temp C Grille Temp F Temp C Minutes CuissonTemps minutes BœufAgneau PorcPoulet Aero GrilGrille Temp F Temp C Minutes Bœuf US 68 Directives de cuisson CA FR Temp F Temp CMeilleur Grille Du four Sonde De sondeDirectives de cuisson 69 US DindeNettoyage de la surface extérieure de la porte en verre Entretien et nettoyageNettoyage et entretien manuels Remplacement des ampoules de lampes du four Entretien et nettoyage 71 USNettoyage des surfaces en émail vitrifié Nettoyage des grilles coulissantesMode Auto Nettoy Utilisation du mode Auto NettoyCycle d’autonettoyage court Autonettoyage début retardéMode Select Utilis Paramètres de préférence de l’utilisateurComment changer l’ALARME Courte Lorsque l’ALARME Courte est activéeComment activer l’ALARME Courte Comment changer l’échelle de températureVerrouillage du tableau de commande Pour verrouiller le tableau de commandeComment changer la langue Comment réinitialiser le fourDépannage DépannageCodes d’anomalies 78 Dépannage Problème Cause possible Que faire ?Garantie et service Avant de demander un service après-vente ou une assistancePage Page US CA
Related manuals
Manual 4 pages 13.83 Kb

WODU30, WOSU30, WOU130, WOUD230 specifications

DCS WOUD230 and WOU130 are advanced air quality monitoring devices designed to provide real-time data on environmental conditions. These systems represent the latest in monitoring technology, catering to a variety of applications, from industrial settings to urban environments.

The DCS WOUD230 is equipped with a high-precision sensor suite that measures a range of pollutants, including particulate matter (PM2.5 and PM10), nitrogen dioxide (NO2), sulfur dioxide (SO2), and ozone (O3). Its ability to detect these pollutants allows for comprehensive air quality assessments, making it an excellent choice for regulatory compliance and environmental research.

On the other hand, the DCS WOU130 is designed with energy efficiency in mind. It utilizes low-power technologies that ensure continuous operation without excessive energy consumption. This makes it suitable for deployment in remote locations where power supply may be limited. Both devices feature ruggedized designs, making them highly durable and capable of withstanding harsh environmental conditions.

One of the standout features of both the WOUD230 and WOU130 is their connectivity options. They are equipped with Wi-Fi and cellular communication capabilities, enabling seamless data transfer to cloud-based platforms. This allows users to access real-time data from anywhere in the world through a user-friendly interface. Additionally, both models can be integrated with existing environmental monitoring systems, providing flexibility and scalability.

Another key characteristic of these devices is their advanced data analytics capabilities. They come with built-in algorithms that not only collect data but analyze it to identify trends and patterns in air quality over time. This functionality is essential for researchers and policymakers who need to make informed decisions based on reliable data.

Moreover, the WOUD230 and WOU130 include alert systems that notify users of sudden changes in air quality, facilitating timely responses to potential hazards. This feature is particularly important in urban areas where pollution levels can fluctuate rapidly due to traffic, construction, or weather conditions.

In conclusion, the DCS WOUD230 and WOU130 air quality monitors are powerful tools equipped with cutting-edge technologies that provide reliable and actionable environmental data. Their combination of precision, connectivity, and durability makes them indispensable for anyone looking to monitor air quality effectively. Whether for industrial compliance, scientific research, or public health awareness, these devices play a critical role in understanding and improving our environment.
Top Page Image Contents