DCS WOUD230, WOU130, WOSU30, WODU30 manual User preference settings, User Select mode

Page 36
PUSH TO
CLEAR

US CA

34

User preference settings

USER SELECT mode

USER SELECT mode allows you to configure some of the settings displayed on your oven control panel.

How to enter USER SELECT mode

1Be sure that the oven mode and temperature knobs are off, that no automatic programs are operating and that the clock is displaying the correct time.

2Press the TIMER and the CLOCK buttons and hold them down together until the oven beeps (about two seconds). The oven mode display will show USER SELECT.

How to use SABBATH mode

This mode is designed for religious faiths that observe a ‘no work’ requirement on the Sabbath.

When your oven is in SABBATH mode

Clock, temperature and oven mode displays will be disabled. No tones will sound.

No error messages or temperature changes will be displayed, however temperature can be adjusted.

If you set SABBATH mode with the oven door open, the oven lights will stay on while in SABBATH mode. If you set SABBATH mode with the oven door closed, the oven lights will stay off while in SABBATH mode.

BAKE is the only oven mode available in SABBATH mode.

How to set SABBATH mode

1Enter the USER SELECT mode and turn the oven mode knob clockwise until SAB MODE appears in its display.

2 Select the length of time you wish to stay in SAB MODE by rotating the

PUSH TO

button. The

CLEAR

maximum is 99 hours, in one hour steps, and is shown in the clock display.

3Select a temperature.

4 To start SABBATH mode, press the button. The oven mode display will show SAB MODE with no backlight. The temperature display will show --- ; temperatures can be adjusted but the display will not change.

5In double oven models, you can select different temperatures for the upper and lower ovens by using their temperature knobs. In order to activate the lower oven, however, you also need to turn its oven mode knob one position clockwise (you will see no change in the mode display).

Tips for using SABBATH mode

The oven can be turned off at any time during SABBATH mode by turning the oven mode and temperature knobs to OFF, but the oven will not revert to regular operation until the set time has elapsed.

You can exit SABBATH mode at any time by pressing the PUSH TO button and holding it

CLEAR

down for five seconds.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents User guide Guide d’utilisation Page Contents Safety and warnings OperationImportant safety instructions US CA Introduction About your new ovenUsing your oven before you start Setting the clockTo set the clock Using the oven controls TimerOven Modes Cooling fan Broil upper inner elementMaxi Broil upper inner and outer elements Conv Broil fan plus upper inner and outer elementsUsing your oven Positioning the shelvesTo position the shelves Choosing the right bakeware US CASelecting mode and temperature Preheating your ovenUsing the oven modes Baking Roasting BroilingTips for dehydrating fruit Tips for proofing breadUsing the meat probe Temperature knobs to OFFTips for using the meat probe When automatic cooking is set When automatic cooking has finishedAutomatic cooking To set automatic time cookingWhen automatic stop cooking is set When automatic stop cooking has finishedCanceling automatic cooking Automatic stop cookingCooking guidelines BakingRoasting BroilingShelf Temp F Temp C Time min BakingConv Bake Bake Shelf Single multi Temp F Temp C Time min BakingConv Pastry Pastry BakeShelf Temp F Temp C Time min Baking Shelf Broil setting Time min Beef LambPork SausagesConv Broil Shelf Temp F Temp C Time min BeefChicken Roasting meat Temp F Temp C 450 g Best Mode Cooking guidelines 29 USOven Probe Per lb Shelf Temp F Care and cleaning Manual cleaning and maintenanceCleaning the control panel and the stainless steel surfaces Cleaning the exterior surface of the glass doorCare and cleaning 31 US Cleaning the porcelain enamel surfacesCleaning the sliding shelves Cleaning the broil/roast system and side racksSelf Clean mode Using the Self Clean modeTo cancel the Self Clean mode before it has finished Short self-clean cycleSelf-clean delayed start RotateUser preference settings User Select modeUser preference settings 35 US How to change the language How to reset the ovenHow to lock the control panel To lock the control panelTroubleshooting Fault codesTroubleshooting Oven door will not Warranty and service Before you call for service or assistanceProduct details CA FR Conserver CES Instructions 42 Sécurité et mises en garde FonctionnementImportantes consignes de sécurité Sécurité et mises en garde44 Sécurité et mises en garde Propos du nouveau four Utilisation du four avant de commencer Réglage de l’horlogePour mettre l’horloge à l’heure Utilisation des commandes du four MinuteurBouton de sélection de la cavité du four Pour régler le minuteurModes de four Aero Pure ventilateur et élément chauffant du ventilateurCuisso Normal éléments chauffants supérieur et inférieur Aero Gateau ventilateur et élément chauffant inférieurVentilateur de refroidissement Gril élément chauffant intérieur supérieurUtilisation du four Positionnement des grillesPositionnement des grilles Sélection des plats allant au four adéquats Sélection de mode et de température Préchauffage du fourUtilisation des modes du four Cuisson Rôtissage GrilConseils pour déshydrater les fruits Conseils pour l’apprêt du painUtilisation de la sonde thermique Aero Gril ne nécessitent pas de préchauffageConseils quant à l’utilisation de la sonde thermique Cuisson automatique Pour régler la cuisson à durée automatiqueLorsque la cuisson automatique est programmée Lorsque la cuisson automatique est terminéeCuisson à arrêt automatique Pour régler la cuisson à arrêt automatiqueLorsque la cuisson à arrêt automatique est programmée Lorsque la cuisson à arrêt automatique est terminéeDirectives de cuisson Rôtissage GrilAero Pure GrilleSimple Temps Multiple Temp F Temp C Minutes Cuisson Cuisso Aero Simple Temps Multiple Temp F Temp CCuisso Normal Aero Gateau Cuisso GateauGrille Temp F Temp C Grille Temp F Temp C Minutes CuissonTemps minutes BœufAgneau PorcAero Gril Grille Temp F Temp C Minutes BœufPoulet US 68 Directives de cuisson CA FR Temp F Temp CMeilleur Grille Du four Sonde De sondeDirectives de cuisson 69 US DindeEntretien et nettoyage Nettoyage et entretien manuelsNettoyage de la surface extérieure de la porte en verre Remplacement des ampoules de lampes du four Entretien et nettoyage 71 USNettoyage des surfaces en émail vitrifié Nettoyage des grilles coulissantesMode Auto Nettoy Utilisation du mode Auto NettoyCycle d’autonettoyage court Autonettoyage début retardéMode Select Utilis Paramètres de préférence de l’utilisateurComment changer l’ALARME Courte Lorsque l’ALARME Courte est activéeComment activer l’ALARME Courte Comment changer l’échelle de températureVerrouillage du tableau de commande Pour verrouiller le tableau de commandeComment changer la langue Comment réinitialiser le fourDépannage Codes d’anomaliesDépannage 78 Dépannage Problème Cause possible Que faire ?Garantie et service Avant de demander un service après-vente ou une assistancePage Page US CA
Related manuals
Manual 4 pages 13.83 Kb

WODU30, WOSU30, WOU130, WOUD230 specifications

DCS WOUD230 and WOU130 are advanced air quality monitoring devices designed to provide real-time data on environmental conditions. These systems represent the latest in monitoring technology, catering to a variety of applications, from industrial settings to urban environments.

The DCS WOUD230 is equipped with a high-precision sensor suite that measures a range of pollutants, including particulate matter (PM2.5 and PM10), nitrogen dioxide (NO2), sulfur dioxide (SO2), and ozone (O3). Its ability to detect these pollutants allows for comprehensive air quality assessments, making it an excellent choice for regulatory compliance and environmental research.

On the other hand, the DCS WOU130 is designed with energy efficiency in mind. It utilizes low-power technologies that ensure continuous operation without excessive energy consumption. This makes it suitable for deployment in remote locations where power supply may be limited. Both devices feature ruggedized designs, making them highly durable and capable of withstanding harsh environmental conditions.

One of the standout features of both the WOUD230 and WOU130 is their connectivity options. They are equipped with Wi-Fi and cellular communication capabilities, enabling seamless data transfer to cloud-based platforms. This allows users to access real-time data from anywhere in the world through a user-friendly interface. Additionally, both models can be integrated with existing environmental monitoring systems, providing flexibility and scalability.

Another key characteristic of these devices is their advanced data analytics capabilities. They come with built-in algorithms that not only collect data but analyze it to identify trends and patterns in air quality over time. This functionality is essential for researchers and policymakers who need to make informed decisions based on reliable data.

Moreover, the WOUD230 and WOU130 include alert systems that notify users of sudden changes in air quality, facilitating timely responses to potential hazards. This feature is particularly important in urban areas where pollution levels can fluctuate rapidly due to traffic, construction, or weather conditions.

In conclusion, the DCS WOUD230 and WOU130 air quality monitors are powerful tools equipped with cutting-edge technologies that provide reliable and actionable environmental data. Their combination of precision, connectivity, and durability makes them indispensable for anyone looking to monitor air quality effectively. Whether for industrial compliance, scientific research, or public health awareness, these devices play a critical role in understanding and improving our environment.
Top Page Image Contents