Shelves and Shelf Frames
To remove and replace a shelf/frame:
1.Remove the shelf/frame by tilting it up at the front and lifting it out of the shelf supports.
2.Replace the shelf/frame by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until rear shelf hooks drop into the shelf supports. Check to make sure that the shelf is securely in position.
Flip-up Shelf
(on some models)
To raise or lower the shelf:
1.Raise the shelf by pulling forward on the lever located at the bottom front of the shelf and lift until the shelf locks into the vertical position.
2.Lower the shelf until it is latched securely in place.
To remove and replace the deli drawer:
1.Remove the deli drawer by sliding it straight out to the stop. Lift the front and slide the drawer out the rest of the way.
2.Replace the deli drawer by sliding it back past the stop.
Convertible Vegetable/Meat Drawer,
Crisper and Covers
(on some models)
Crisper and Convertible Vegetable Meat Drawers
To remove and replace drawers:
1.Slide crisper or meat drawer straight out to the stop. Lift the front of drawer with one hand while supporting the bottom of drawer with other hand and slide the drawer out the rest of the way.
2.Replace the crisper or meat drawer by sliding it back in fully past the drawer stop.
Adjustable Flip-up Shelf
(on some models)
To raise or lower the shelf:
1.Raise the shelf by first sliding it back and down to make it
2.Lift the front of the shelf until it fits securely in place against the back wall. Lower the shelf securely back into position.
3.Pull the front of the shelf forward until it fits into place.
Deli Drawer
(on some models)
The deli drawer stores raisins, nuts, spreads, and other small items at normal refrigerator temperatures.
Crisper or Vegetable/Meat Drawer Covers
To remove and replace covers:
1.Remove the crisper and meat drawer. Press up in center of crisper glass insert until it rises above the plastic frame. Holding the crisper glass firmly, carefully slide the glass insert forward to remove.
2.Lift crisper cover frame and remove. Repeat steps to remove the meat drawer cover.
3.Replace back of meat drawer cover frame into supports or slides on side walls of the refrigerator and lower or slide the front of the cover frame into place.
4.Slide rear of glass insert into cover frame and lower front into place. Repeat steps to replace the crisper cover.
Convertible Vegetable/Meat Drawer
Temperature Control
The convertible vegetable/meat drawer can be adjusted to properly chill meats or vegetables. The air inside the pan is cooled to prevent “spot” freezing and can be set to keep meats at the National Livestock and Meat Board recommended storage temperatures of 28°- 32°F
IMPORTANT: To extend freshness, wrap meats in airtight,
Adjusting the control
The convertible control comes preset at the lowest meat setting.
To change a control setting: Move the control to the right (colder) or to the left (less cold) as desired.
14