ENGLISH
When selecting the OSD AUTO DISPLAY
•When the OSD AUTO DISPLAY is set to On, the current status display overlaps the program image on the monitor TV and may interfere with your movie enjoyment. In such a case, set the OSD AUTO DISPLAY to Off.
Press the CURSOR UP()/DOWN()
1 buttons to select the OSD AUTO DISPLAY.
PAGE | MAIN | FAV |
VOL |
|
|
1 2 3
4 5 6
7 8 9
0
MI M2 M3
When selecting the CURRENT VIDEO
•You can select a video input source on the OSD menu and enjoy its image.
Press the CURSOR UP()/DOWN()
1 buttons to select the CURRENT VIDEO.
PAGE | MAIN | FAV |
VOL |
|
|
1 2 3
4 5 6
7 8 9
0
MI M2 M3
Press the CURSOR LEFT( )/RIGHT()
2 buttons to select the desired mode.
PAGE | MAIN | FAV |
VOL |
|
|
1 2 3
4 5 6
7 8 9
0
MI M2 M3
•Each time these buttons are pressed, the mode changes as follows:
On : To turn on the current status display.
Off : To turn off the current status display.
2 | Press the CURSOR LEFT( )/RIGHT( ) |
source.buttons to select the desired video input |
PAGE | MAIN | FAV |
VOL |
|
|
1 2 3
4 5 6
7 8 9
0
MI M2 M3
• Each time these buttons are pressed, the video input source changes.
55