Installation Instructions (Models CPL1100AD*, CGL1100AD*)
INSTALLATION
Check the range model number plate to see if the range is approved for installation in mobile homes and/or recreational park trailers. If approved the following items are applicable.
MOBILE HOMES
The installation of a range designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24 HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations ANSI A225.1/NFPA 501A, or with local codes.
In Canada the range must be installed in accordance with the current CSA Standard C22.1 - Canadian Electrical Code Part 1 and Section Z240.4.1 - Installation Requirements for Gas Burning Appliances in Mobile Homes (CSA Standard CAN/CSA - Z240MH).
RECREATIONAL PARK TRAILERS
The installation of a range designed for recreational park trailers must conform with state or other codes or, in the absence of such codes, with the Standard for Recreational Park Trailers, ANSI
In Canada the range must be installed in accordance with Section C22.2 No. 148/CAN/CSA - Z240.6.2 - Electrical Requirements for R.V.’s (CSA Standard CAN/CSA - Z240 RV Series) and Section Z240.4.2 - Installation Requirements for Propane Appliances and Equipment in R.V.’s (CSA Standard CAN/CSA - Z240 RV Series).
REMOVAL OF SHIPPING & PACKING
a.Using carton corner posts (4), folded flat and stacked two high to protect floor, lay range on its back. Remove the four screws which attach skid to base of range.
b.Stand range upright.
c.Remove all packing material, tape and protective film on some chrome plated or stainless steel parts before range is installed.
INSTALLATION DRAWINGS
©2004 Maytag Services | 16023522 | A– 4 |