Troubleshooting Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.
Problem | Possible Cause |
| Failed oven lamp |
| Failed wiring |
Oven light does not operate. | Failed light socket |
| |
| Failed light plunger/switch |
|
|
| Oven is cleaning |
| Oven is still hot |
Oven door will not unlock |
|
|
|
Oven smokes/odor first few | Normal |
times of usage |
|
Failure Codes | Electronically Controlled |
| |
|
|
| Power Outage |
| Improperly set oven controls |
Part or all of the appliance | Oven door locked |
does not work |
|
| Delayed cooking |
|
|
Correction
•Check lamp and replace is necessary.
•Check for broken, loose or dirty connections.
•Check light socket for continuity.
•Check plunger/switch for continuity. Check wiring diagram for application.
•Allow cycle to complete.
•Door will not unlock until unit has cooled to safe temperature. Do not force door open, this will void warranty. Blow cool air on door latch area to quicken process.
•Minor smoking and/or odor is normal the first few times of oven usage.
•See Testing Procedures for diagnostic checks.
•Check power supply/circuit breaker.
•Verify oven controls are properly set.
•Verify oven door is unlocked after a clean cycle.
•Verify oven is not set for delayed cooking program.
©2004 Maytag Services | 16023522 | 13 |