Self-Clean Oven Control select models | Maytag CGR1125ADQ/W specs

Maytag CGR1125ADQ/W, CPL1100ADH/L/Q/T/W, AGR5712ADB/Q/S/W Self-Clean Oven Control select models

Use Instructions (Models CPR1100AD*, CGR1110AD*, CGL1100AD*, CGR1415AD*, CGR1425AD*, CGR3725AD*, CP31200AD*, CG31200AD*, CG31400AD*, CP31600AD*, CG31600AD*, CG34800AD*)

Oven Cooking

Self-Clean Oven Control (select models)

A BC D

E F G H I J

The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions. Control panel shown includes model specific features. (Styling may vary depending on model.)

A	BROIL	Use for broiling and top browning.
B	BAKE	Use for baking and roasting.
C	More (▲) or	Enters or changes time, oven
	Less (▼)	temperature. Sets HI or LO broil.
D	TIMER	Sets timer.
E	COOK & HOLD	Bakes for a preset time, then holds food
		warm for 1 hour.
F	CLEAN	Use to set self-clean cycle.
G	DELAY	Programs the oven to start baking at
		a later time.
H	CLOCK	Use to set time of day clock.
I	KEEP WARM	Use to keep cooked food warm in oven.
J	CANCEL	Cancels all operations except timer
		and clock.

Using the Touchpads

•Press the desired pad.

•Press the ▲ or ▼ to enter time or temperature.

•A beep will sound when any pad is touched.

•A double beep will sound if a programming error occurs.

Note: Four seconds after pressing the ▲ or ▼ pads, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the ▲ or ▼ pads, the function will be canceled and the display will return to the previous display.

Clock

The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format.

To change the clock to 24-hour format:

1.Press and hold the CANCEL and DELAY pads for three seconds.

2. Press ▲ or ▼ to select 12 or 24 hour.

3.Set the time of day following the directions below.

To set the Clock:

1.Press the CLOCK pad.

•Time of day and colon flash in the display.

2.Press ▲ or ▼ to set the time of day.

•Colon continues flashing.

3.Press the CLOCK pad again or wait four seconds.

When electrical power is supplied or after a power interruption, the last clock time before power was interrupted will flash.

To recall the time of day when another time function is showing, press the CLOCK pad.

Clock time cannot be changed when the oven has been programmed for cook or clean Delay or Cook & Hold.

cont.

16023522

B–6