Use Instructions (Models AGR4400AD*, AGR4412AD*, AGR5712AD*, MGR4451AD*, MGR4452AD*, MGR5751AD*, MGR5752AD*, PGR4420LD*, PGR5720LD*)
Oven Cooking
Manual Clean Oven Control
(select models)
AB
C D E F
NOTE: The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil indicators light when function is pressed.
ABake
BBroil
CTimer
DClock
ECancel
F▲ (More) or ▼ (Less)
Use for baking and roasting.
Use for broiling and top browning.
Sets timer.
Use to set
Cancels all operations except timer and clock.
Enters or changes time, oven temperature. Sets HI or LO broil.
2.Set the correct time of day using the ▲ or ▼ pads. If the ▲ or ▼ pad is not pressed within 30 seconds, the program will cancel. Press the Clock pad and begin again.
Setting the Timer
The timer can be set from one minute (:01) up to 99 hours and 59 minutes (99:59). Time will be displayed in minutes and not in seconds. THE TIMER DOES NOT CONTROL THE OVEN.
Using the Touchpads
•Press the desired pad.
•Press the ▲ or ▼ pad to enter time or temperature.
•A beep will sound each time a function pad is pressed. There is no beep for the ▲ or ▼ pad.
•A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the ▲ or ▼ pad, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the ▲ or ▼ pad, the function will be canceled and the display will return to the previous display.
Setting the Clock
1. Press the Clock pad.
•The clock time cannot be set if the control is programmed for a bake, broil or timing operation.
1.Press the Timer pad.
•0:00 will light and the colon (:) will flash in the display.
2.Press the ▲ or ▼ pad until the desired time is displayed.
•The timer will begin as soon as the time is set.
•The flashing colon indicates that a timing operation is in progress. (The colon will not flash if the time of day or oven temperature is displayed.)
•Two short beeps signal the end of the operation. “0:00” will appear in the display.
•If desired, press the Clock pad and the time of day will briefly reappear in the display during a timing operation.
•If desired, press the Bake or Broil pads and the current temperature setting will briefly reappear in the display during a timing operation.
To cancel the timer operation:
Press and hold the Timer pad for several seconds.
©2004 Maytag Services | 16023522 |