Chapter 2 Installing Cisco CallManager Extended Services
Installing Cisco CallManager Extended Services
Step 10 At this point, the installation checks for the presence of Cisco CallManager 3.1.
If Cisco CallManager Release 3.1 is not present, you are prompted to upgrade to Cisco CallManager Release 3.1.The installation of Cisco CallManager Extended Services will not continue until Cisco CallManager Release 3.1 is present.
Step 11 Confirm your installation selection by clicking Yes.
The system displays a message asking where the Cisco CallManager Database is located.
Step 12 To install Cisco CallManager Extension Mobility on the same server as Cisco CallManager, select This Server.
To install Cisco CallManager Extension Mobility on a different server from Cisco CallManager, select A Different Server and enter the server’s hostname, and a username and password.
Step 13 Click Next.
Step 14 At the CiscoWorks2000 Syslog Configuration screen you can elect to configure the CiscoWorks2000 Syslog collector.
If you have a CiscoWorks2000 server on your network, you can click the Configure CiscoWorks2000 Syslog Collector check box to install the CiscoWorks Syslog Collector module on this computer. If you click this check box, enter the location of your CiscoWorks2000 server.
If you do not have a CiscoWorks 2000 server on your network, do not click the Configure CiscoWorks 2000 Syslog Collector check box.
Step 15 At the Ready to Install Cisco CallManager Extended Services window, click Next.
The system takes approximately 10 minutes to install Cisco CallManager
Extended Services.
Step 16 The installation blanks the administrator password.
a.Enter the new password to be used for the MCS or Cisco certified server. Click Okay.
b.Enter the new password to be used for the SQL Server. Click Okay.
Step 17 To reboot, click Yes when prompted.
|
| Cisco CallManager Extended Services Administrator’s Guide |
|
|
|
|
| ||
|
|
|
| |
|
|
|