Rotel RSX-972 owner manual Specifications

Page 27

Specifications

Audio

Continuous Amplifier Power (all channels driven)

75 watts/ch (20-20k Hz, <0.09% THD, 8 ohms) 100 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)

Total Harmonic Distortion <0.09%

Intermodulation Distortion (60 Hz:7 kHz)

<0.09%

Frequency Response

10 Hz - 20 kHz, ±1 dB (line level)

10 Hz - 20 kHz, ±0.3 dB (digital level)

Signal to Noise Ratio (IHF A-weighted) 92 dB (Stereo) Analog

90 dB (Dolby Digital, dts) 0dBFs

Input Sensitivity/Impedance

Line Level: 200 mV/47 kohms

Tone Controls (Bass/Treble)

±8 dB at 100 Hz/10 kHz

Line Output Level

600 mV (200 mV Input)

Video

Frequency Response

3 Hz-10 MHz, ± 3 dB

Signal to Noise Ratio

45 dB

Input Impedance

75 ohms

Output Impedance

75 ohms

Output Level 1 volt

FM Tuner

Usable Sensitivity 14.2 dBf

Signal to Noise Ratio (at 65 dBf) 70 dBf

Harmonic Distortion (at 65 dBf) 0.03%

Stereo Separation (1 kHz) 45 dB

Output level 1 V

Antenna Input

75 ohms unbalanced

27

English

AM Tuner

Sensitivity

500 μV/m

Signal to Noise Ratio 40 dBf

Output level 500 mV

Antenna Input

Loop Antenna

General

Power Consumption:

850 watts

Power Requirements (AC) 115 volts, 60Hz (USA)

230 volts, 50Hz (CE)

Weight

15 Kg/33 lb.

Dimensions (W x H x D) 445 x 160 x 400 mm

171/2" x 61/4" x 153/4"

All specifications are accurate at the time of printing.

Rotel reserves the right to make improvements without notice.

Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.

DTS is a registered trademark of Digital Theater

Systems.

Manufactured under license from Dolby Laborato- ries Licensing Corporation. “Dolby”, “Pro Logic”, “Dolby Surround”, “Dolby Digital”, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Confidential unpublished works © 1992 – 1997 Dolby Labora- tories, Inc. All rights reserved.

Page 26 Page 28
Image 27
Page 26 Page 28
Contents RSX-972 English Explication des symboles graphiques FrançaisDeutsch RSX-972 Power VOL RR-969 Remote Télécommande RR-969 Fernbedienung RR-969Subwoofer Front L Center Front R Outputs Sorties AusgangsanschlüsseRotel RSX-972 Inputs Entrées EingangsanschlüsseAmplifier Verstärker Zone 2 IR Antenna Antenne Anschließen der Antennen System Status Contents Key Features PlacementUnpacking Basic Controls EXT Input ControlsTuner Controls Direct Button Numeric Buttons Station PresetsPreset Button Memory ButtonTA Button Display ButtonPTY Button TP ButtonTape Inputs and Outputs Video Source InputsVideo Connections CD InputsVideo Antenna Connections 12V Trigger Connections FM Wire AntennaZone 2 Power On/Off Operation AC InputZone REM in Jack Controlling Zone 2 from the Main Room Zone ButtonControlling Zone 2 from the Remote Location Zone 2 Audio OutputsSystem Status Menu ConfigurationIR OUT Jacks Navigation ButtonsSurround Speakers small/large Speaker Setup MenuInput Menu Center Speaker small/large/noneDelay Setup Menu Subwoofer Level MenuTest Tone Menu Reset Menu Zone 2 Setup MenuOther Options Menu Specifications Sommaire Les commandes des entréesPour démarrer Au sujet de RotelMise en veille Standby Capteur de télécommandeCommande de volume Programmation de la RR-969Touche d’entrée 5.1 CH 5+1 canaux Touche d’entrée EXT Les commandes du son SurroundTouches de sélection de source en lecture Touche d’enregistrement REC Touche ZoneDynamic Range Commandes du tunerMemory BandPreset Vidéo Composite et S-Vidéo Sauf ex Informations concernant les branchements VidéoTape Entrées numériques Digital Video 1-3 sorties AudioVideo 1-3 sorties Vidéo composite Video 1-3 sorties Vidéo S-vidéoExternal REM. Pour activer ou désactiver la Zone Mise en/hors service fonctionnement ZonePrises IR OUT Contrôle de la Zone 2 à partir de la télécommandeSorties audio Zone Prise Zone REMTouches de navigation Touches repérées DOWN/-UP basTouches repérées +/- Modifient le Menu des entrées Input Menu principal Main MenuMenu de réglage des enceintes acoustiques Speaker Setup Menu de réglage du temps de retard Delay Setup Menu du générateur de signal de test Test ToneMenu de réglage du caisson de grave Subwoofer Level Menu de remise à zéro des réglages Reset Menus des autres optionsOther Options Spécifications Zone 2 SetupAuf die Abbildungen des RSX-972. Die grau Die grau markierten Zahlen beziehen sichEinige Vorsichtsmaßnahmen Die Firma RotelWesentliche Ausstattungsmerkmale Auspacken des GerätesGrundfunktionen Eingangswahl 2CH-Taste PROLOGIC-TasteSTEREO-Taste DSP-TasteZifferntasten PTY-Taste PRESET-TasteDIRECT-Taste MONO-TasteInformationen zu den Videoanschlüssen ÜberblickTP-Taste TA-TasteAnschließen der Audioquellen Video 1 Video-Ausgänge Anschließen einer DigitalquelleVideo 1 3 Audioausgänge Video 1 3 Composite-Video-AusgängeAntennenanschlüsse Zone 2-Betrieb Bedienung von Zone 2 vom Haupthörraum aus ZONE-Taste Steuerung von Zone 2 über die FernbedienungZone 2-Audioausgänge Diese Tasten führen Sie durch die Menüs Volume Lautstaerke die aktuelleZone REM IN-Buchse IR OUT-BuchsenEingangs Setup MAIN-Menü HauptmenuINPUT-Menü Centerlautsprecher small/large Speaker SETUP-MenüLautsprecher Typen Frontlautsprecher small/largeTest TONE-Menü Delay SETUP-MenüVerzoegerungs Zeiten Subwoofer LEVEL-Menü SUB PegelRESET-Menü Ruecksetzen AUF Grundeinstellung Other OPTIONS-MenüWeitere Einstellungen Zone Einstellungen Technische DatenPage Page Rotel of America Rotel EuropeRotel Deutschland

RSX-972 specifications

The Rotel RSX-972 is a high-performance home theater receiver that combines sophisticated audio processing with versatile connectivity options, making it an ideal choice for audiophiles and home theater enthusiasts alike. Known for its robust build quality and impeccable sound reproduction, the RSX-972 exemplifies Rotel's commitment to delivering premium audio experiences.

One of the hallmark features of the RSX-972 is its exceptional power amplification. The unit is outfitted with a high-output, multi-channel amplifier that provides 100 watts per channel across all five channels. This ensures that your audio sources, whether they be movies, music, or games, are delivered with clarity and impact, allowing users to enjoy an immersive soundstage. Additionally, the receiver employs Rotel's proprietary Distributed Mode Radiators (DMR) technology that enhances bass response and overall frequency performance, further enriching the audio experience.

In terms of connectivity, the RSX-972 is equipped with a plethora of input and output options to accommodate various audio and video components. It features multiple digital audio inputs, including coaxial and optical connections, as well as traditional analog inputs. The inclusion of a built-in AM/FM tuner also allows users to access radio broadcasts with ease.

The RSX-972 supports multiple surround sound formats, including Dolby Digital, DTS, and other advanced audio technologies. This allows the receiver to decode high-definition soundtracks seamlessly, ensuring a cinema-like experience at home. Moreover, the integrated video upscaling capability enhances standard-definition video sources, providing improved clarity and resolution for a more engaging visual experience.

Another standout aspect of the RSX-972 is its user-friendly interface. The receiver comes with an intuitive remote control and an on-screen display that simplifies navigation and setup. Users can easily switch between sources, adjust audio settings, and configure speaker settings without hassle.

The build quality of the Rotel RSX-972 is exceptional, featuring a sleek aluminum front panel and high-grade components designed to minimize distortion and improve overall sound fidelity. Whether you're watching action-packed films or listening to your favorite music, the RSX-972 stands out as a solid performer, delivering a versatile and high-fidelity audio experience that is hard to surpass in its class. With these features, it remains a strong choice for anyone looking to enhance their home entertainment system.
Top Page Image Contents