Rotel RCD-1520 Review Button, Clear Button H, Random Button 4O, Repeat Button 9B, Scan Button 0C

	RCD-1520 Stereo Compcat Disc Player
10

3.To program tracks from the handheld remote control, enter the first track number using the DIRECT ACCESS F buttons. Your selection will be memorized automatically and the Display indicator will change to “P:01”, indicating that one track has been memorized. Continue entering the rest of your selections using the DIRECT ACCESS buttons. Note that there is no need to press the PROGRAM button as each selection is memorized as it is entered.

4.To program tracks from the front panel, select the first track number using the TRACK rt buttons. To memorize additional tracks, select them with the TRACK buttons, pressing the PROGRAM button after each selection.

Once you have memorized a play list, the RCD‑1520 remains in PROGRAM mode until you eject the disc or press the STOP button twice in succession. If you press the PLAY button, the memorized program will play instead of the entire disc, starting with the first selection in the memorized list.

When a PROGRAM has been memorized, most functions that would normally affect the entire disc operate on just the memorized program. For example, the TRACK buttons advance to the next track in the memorized program, not the next track on the disc. Likewise, the REPEAT button (see below) continuously plays the memorized program, not the entire disc.

Note: The Random Play feature cannot be used when using the Programmed Play feature.

REVIEW Button 3I

This button is used to review the memorized tracks in Program Play mode. Press the button and the first memorized track number and “Prog Review” will appear in the Display. Pressing the REVIEW button again while the track number is displayed will continue the review sequence, showing the next memorized track. Continue pressing the REVIEW button to see the complete memorized track list.

If the REVIEW button is not press again, after 5 seconds the review process is terminated and the unit resumes whatever mode it was in before you started the review process or resumes Program Play with the current track.

You may remove a selection from the Program Play list during the review procedure using the CLEAR button, as described below.

CLEAR Button H

(remote only)

This button allows you to remove a track selection from the memorized program play list during the review procedure described above. Follow the review procedure until the desired track number appears. Then, instead of pressing the REVIEW button to continue, remove

the track by pressing the CLEAR button while the track number is displayed. You may then continue the review procedure.

RANDOM Button 4O

This instructs the CD player to play tracks from the entire disc in random order. Once all of the selections have been played once, the disc will stop playing, unless the REPEAT Button (see below) has been engaged, in which case the random play will continue until the STOP button is pressed. When the RANDOM button is engaged, the icon appears in the Display.

REPEAT Button 9B

This button allows you to repeat the current track or the entire disc continuously until the feature is cancelled by disengaging the REPEAT button or pressing STOP. The REPEAT button steps sequentially through the available options. Press the button once and the RCD‑1520 will repeat just the current track. The icon appears in the Display. Press the button a second time and the RCD‑1520 will repeat the entire disc. A second icon appears in the Display. Press the button a third time to cancel the REPEAT function.

As noted above, REPEAT can be used in conjunction with the RANDOM play feature. The REPEAT and RANDOM play combination can also be used when playing CD-DA discs.

Note: The REPEAT function is automatically cancelled when the disc is ejected

SCAN Button 0C

This feature automatically plays the first ten seconds of each track on the disc (or the memorized program). To activate the feature, press the SCAN button. The icon appears in the Display. To stop scanning and resume normal operation at the current track, press the SCAN button again or press the PLAY / qE button.

The RANDOM and INTRO play combination can also be used when playing CD-DA discs.

TIME Button -G

Normally, the RCD‑1520 displays the elapsed time of the currently playing track. The TIME button allows you to see alternative time displays. Pressing the button once displays the time remaining in the current track, which counts down as the track continues playing. Pressing the button a second time displays the time remaining on the entire disc (or memorized program). When the alternative time displays are selected an “R” icon appears in the display. Pressing the button a third time reverts to the standard elapsed time display.

Note: When playing MP3 and WMA discs, only the regular elapsed time and the time remaining in the current track can be displayed.