W Bas < et
To remove wire basket:
Pull drawer open to full extension. Tilt the lower basket forward and lift out.
To replace wire basket:
Tilt the lower basket front down and set the basket into the basket cradles on the drawer rail.
Bins
To remove and replace the bins:
1.Remove the bin by lifting it up and pulling it straight out.
2.Replace the bin by sliding it in above the desired support and pushing it down until it stops.
_ | _,_, | _ | /_ |
Convenient storage for smaller frozen food items.
To remove and replace the shelf:
1.Remove the shelf by sliding it up and pulling it straight out.
2.Replace the shelf by sliding it in above the desired support and pushing it down until it stops.
DOOR FEATURES
Your model may have some or all of these features.
To remove and replace the dairy center:
1.Remove the dairy center by raising and holding the cover up while lifting the dairy center up and pulling it straight out.
2.Replace the dairy center by sliding it in above the desired support and pushing it down until it stops.
Provides easy access to items stored in the door. To remove and replace the door bucket:
1.Remove the door bucket by tilting it and pulling it straight out.
2.Replace the door bucket by tilting the front down slightly, to slide it into the bracket and tip upright.
To move the door bucket frame:
1.Remove the bucket.
2.Lift the frame up and pull it straight out.
3.Slide the frame in and down into the new location.
To remove and replace the shelf:
1.Remove the shelf by sliding it up and pulling it straight eut.
2.Replace the shelf by sliding it in abeve the desired support and pushing it down until it steps.
12