_) T_A _ CH _ _
The ULTRA WASH _ Soil Removal System gives you sparkling clean dishes, while using less energy and time. The ULTRA WASH _ Soil Removal System includes:
•A Triple Action Filtration system that intermittently filters soil from the wash water, thus eliminating the need to scrape dishes.
How the smartwash TM wash cycle works
When the smartwash TM cycle is selected, it saves energy and water by adjusting the wash cycle as needed.
•Sensors detect the size of the dish load, the soil level, and the water temperature in the dishwasher.
•Sensors automatically adjust the temperature and the amount of water used for the load.
•An ULTRA WASH _ optical soil sensor that detects soil level and detergent quantity appearing in the wash water and adjusts the cycles as needed.
•An Automatic Temperature Control (ATC) that ensures the proper water temperature for the selected wash cycle, dish load size, and soil level of the load.
This dishwasher will automatically calibrate the sensor approximately once a year to your water quality.
IMPORTANT: The very first wash cycle after installation in your home will be adjusted to include an additional 2 rinses for optical soil sensor calibration. For proper calibration, the first cycle should not be interrupted. If this calibration cycle is canceled or stopped before the Clean light comes on at the end of the cycle, the next wash cycle will repeat this sensor calibration.
START-UP GUIDE
Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety information and useful operating tips.
1.Rinse aid is essential for good drying. Be sure to fill the
dispenser before you use your new dishwasher. Each filling will last about 1 to 3 months depending on your usage.
5.Push door firmly closed. The door latches automatically.
6.Run hot water at the sink nearest your dishwasher until the water is hot. (See "Dishwasher Efficiency Tips.") Turn off water.
2.Scrape large food soil and hard items (toothpicks or bones) from dishes.
3. |
|
|
| 7. | Press the desired cycle | and option selections. (See |
Properly load | the dishwasher. (See "Dishwasher | Loading.") | "Dishwasher Use.") |
| ||
| Load dishes with space in between so water will reach the | O |
| |||
| soiled surfaces. Make sure nothing keeps the spray arm(s) |
| ||||
|
|
| ||||
| from | spinning | freely. |
|
|
|
|
|
|
| 8. | Press START/RESUME, | or press START/RESUME to repeat |
|
|
|
|
| the same cycle and options as the previous cycle. | |
|
|
|
|
| IMPORTANT: The Start/Resume light will flash if the door is | |
4. | Add | detergent. | Always use a | detergent. | opened during a cycle. Power interruptions during a cycle | |
|
|
(See "Dishwasher Use.") | may also cause the Start/Resume light to flash. Press START/ | |
RESUME to continue a cycle. | ||
|
6