Operating Instructions
Option Selections
Hi Temp Wash Option
When HI TEMP WASH option is selected, the dishwasher heats the water in the main wash to
approximately 140°F (60°C). Wash action will continue but timer will not advance until proper temperature is reached. The hotter water provided by this option helps activate dishwasher detergent to clean food grease and soil from dishes. HI TEMP WASH option can be used with any cycle except QUICK RINSE.
When HI TEMP WASH option is selected, the light above the pad will come on and remain on until end of cycle. To turn off the HI TEMP WASH option, press the pad a second time. The light above the pad will turn off.
To turn off the HI TEMP option, press the pad a second time. The light above the pad will turn off.
Heat Dry Option
The HEAT DRY option in combination with rinse aid will give you excellent drying results. The energy to use HEAT DRY costs pennies per cycle. You may turn off the HEAT DRY option, however you will have items in your dish load that will not be dry at the end of the
cycle.
With either option, you may see water vapor coming from vent during the drying portion of the cycle. Some models have a vent that is closed during washing to hold moisture and sound inside and then opens for drying.
To turn off the HEAT DRY option, press the pad a second time. The light above the pad will turn off.
The drying option may be changed at any time during the cycle and affects only the drying period.
(continued)
Delay Start
The DELAY START option allows you to automatically delay starting your dishwasher from
On models with
To cancel the DELAY START option and begin the cycle before the delay period is over, press the START/ CANCEL pad.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle. Press START/CANCEL pad and the dishwasher will start a 90
second drain. At the end of the drain, select the desired cycle.
Child Lock Controls
To prevent children from accidently changing the dishwasher cycle or starting the dishwasher, lock the dishwasher controls by pressing and releasing the HEAT DRY pad for 3 seconds while the door is latched. An indicator light on the lock graphic pad will illuminate when the controls are locked and no new selections can be made until the lock is released. To unlock the controls, press the HEAT DRY pad until the indicator light goes out.