Shindaiwa 89302, C242/EVC manual Operation

Page 12

Operation

Shoulder strap

WARNING!

Always wear a shoulder strap or harness when operating this unit. Using a harness with a brushcutter allows you to maintain proper control of the unit and reduces fatigue during extended operation.

1.Hook the strap hook to the hanger on the outer tube.

2.Wear the shoulder strap so that the hook stays at your right hand side.

3.Adjust the length of the shoulder strap so that you can hold and operate the machine comfortably.

IMPORTANT!

Adjust the shoulder strap so the shoul- der pad rests comfortably on the off-side shoulder and the cutting path of the cut- ting attachment is parallel to the ground. Make sure all hooks and adjustment devices are secure.

NOTE:

Using a shoulder strap when operating this unit with a blade allows you to main- tain proper control of the unit and reduces fatigue during extended operation.

Shoulder strap required for use with Brushcutters

Cutting grass with a trimmer head

Your Shindaiwa unit may be equipped with

 

Engine Operating Speeds

one of several Shindaiwa trimmer head mod-

 

Operate at full throttle while cutting grass.

els, each with features for specific applica-

 

 

 

 

tions and/or operational requirements.

 

CAUTION!

 

 

NOTE:

 

Operation at low rpm can lead to pre-

For proper operation, always refer to the

 

 

mature clutch failure.

instructions accompanying the trimmer

 

 

 

head being used.

 

Trimming and Mowing Grass

 

 

Trimmer head styles:

 

Hold the grass trimmer so the trimmer head

 

is angled slightly into the area to be cut. To

Semi-automatic. Trimmer line is indexed

 

ensure maximum trimmer-line service life, cut

when the operator taps the trimmer head

 

only with the tip of the trimmer line. Cut grass

on the ground during operation.

 

by swinging the unit's trimmer head from left

Manual. The operator indexes line manu-

 

to right. Keep the trimmer head horizontal.

 

 

 

ally with the grass trimmer stopped.

 

CAUTION!

Fixed. The operator must stop the unit

 

 

Do not push the rotating line into trees,

and add new lengths of trimmer line

 

 

wire fences or any material that could

manually.

 

 

tangle or break line ends.

Flail. This device, designed for clear-

 

 

 

 

 

 

 

ing weeds and light brush, features

 

 

 

 

 

 

three nylon blades attached to the

 

CAUTION!

 

head by pivots.

 

8VHRQO\ÀH[LEOHQRQPHWDOOLFOLQH

 

 

 

 

 

 

recommended by the manufacturer.

 

 

 

 

Never use, for example, wire or wire-

 

NOTE:

Additional hardware may be required to

 

rope, which can break off and become

 

 

a dangerous projectile.

 

mount the Fixed Line or the Flail type

 

 

 

 

 

trimmer heads.

 

 

 

Edging

 

 

 

Tilt the handle about 100° to the left (from

 

 

 

horizontal) and move forward, holding

 

 

 

the trimmer or brushcutter vertically as

 

 

 

shown.

 

 

 

 

 

Tilt the handle about

 

 

 

100° to the left

 

 

 

 

 

Cut from left to right

Cut

Return

WARNING!

Remove all objects such as rocks, broken glass, nails, wire, or string, which can be thrown or become entangled in the cutting attachment.

CAUTION!

ŶOperation of trimmer without a cutting attachment shield and using exces- sive line length can lead to premature clutch failure.

ŶOperation at low rpm can lead to premature clutch failure.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Brushcutter EnglishContents IntroductionSafety Safety LabelsWork Safely Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentProduct Description Do not make unauthorizedThese units or their components Assembly Handlebar Prior to AssemblyAdjust throttle lever free play Install the handlebarSub-Shield when trimmer head is in use Installing a Trimmer HeadCutting Attachment Shield Installing Brushcutter Blade Install blade holder B on the output shaftRemove the hex wrench Mixing fuel Filling the fuel tankExamples of 501 mixing quantities Minimize the Risk of FireWhen the Engine Starts Starting the EngineAdjusting Engine Idle Idle Speed AdjustmentStopping the Engine Checking Unit ConditionOperation Using a blade Brushcutter Shoulder StrapBlade Thrust Brushcutter HandlebarMaintenance Hour maintenance 10/15 hour maintenancePerform more frequently in dusty or Dirty conditions Gearcase lubricationEvery 135 hours of operation, remove and clean the muffler Remove and replace the fuel filter elementLong Term Storage Blade SharpeningShindaiwa Tornado Blade Multiple-tooth Circular BladeTroubleshooting Guide Engine does not StartWhat To Check Possible CauseLOW Power What To Check Possible Cause RemedyAdditional Problems Emission System Warranty Statement NOTAs Remarques 731-3167, Japan Desmalezadora Introducción ContenidoDeclaraciones De Seguridad Etiquetas de seguridadSeguridad Trabaje con cuidadoMantengase Alerta Etiquetas de seguridadSeguridad continuación El operario debidamente equipadoEsté alerta del area de trabajo Máquina descalzoDescripción del Producto C242Ensamblaje Mango tipo bicicleta Antes de EnsamblarAjuste la holgura del acelerador Ensamblaje continuacion Protector del accesorio de corteProtector Secundario cuando el Instalación del Cabezal de NylonInstalación de la cuchilla desmalezadora Mezcla de Combustible Llenando el Tanque de CombustibleEjemplos de cantidades de mezcla a proporción de Disminuya el riesgo de incendiosArranque del motor Al arrancar el motorArranque del motor continuación Apgado del motorAjuste velocidad mínima del motor 9HULÀTXHODFRQGLFLyQGHODXQLGDGOperación Correa de HombroCorte de Césped Máquinas Equipadas con Cabezal de Corte BordesOperación continuación Mantenimiento Mantenimiento continuación Mantenimiento Cada 10 HorasMantenimiento Cada 10/15 Horas Mantenimiento Cada 50 HorasMantenimiento del silenciador Retire el capuchón de la bujíaAlmacenamiento de Largo Plazo Disco Shindaiwa TornadoDiscos de dientes múltiples Use aceite con estabilizador de combustibleGuia Diagnostico EL Motor no ArrancaQué revisar Posible causaGuia Diagnostico continuación Baja Potencia¿Se sobrecalienta el motor? Depósitos de carbonilla en el pistón o el silenciadorOtros Problemas Esta garantía es administrada por Sus Derechos y Obligaciones de GarantíaCobertura de la Garantía del Fabricante Que Está Cubierto Por Esta GarantíaSP22 SP23 Tualatin, Oregon 97062 USA 11, Ozuka-Nishi Débroussailleuse Table des matières Mises en gardeSécurité Sécurité au travailDemeurer alerte Étiquettes de sécuritéSécurité suite Équipement complet de l’utilisateurTenir compte de l’environnement de travail Nomenclature Caractéristiques techniquesNe jamais effectuer des Assemblage Avant l’assemblageGuidon Réglage du jeu de la gâchette d’accélérationAssemblage suite PÁHFWHXUMontage de la tête de coupe Installer le support de lame B sur l’ar- bre de sortie 1HSDV¿HUGHODPHjXQBre de sortie du carter renvoi d’angle De l’arbre du carter renvoi d’angleMélange de carburant Remplissage du réservoir à carburantExemples de quantités de mélange de carburant à Réduire les risques d’incendieDémarrage du moteur Lorsque le moteur démarreDémarrage du moteur suite Arrêt du moteurRéglage du ralenti du moteur Contrôle de l’état de l’appareilFonctionnement Fonctionnement suite Entretien Entretien suite Entretien toutes les 10 heuresEntretien toutes les 10 15 heures Enlever et nettoyer la bougieEntretien toutes les 50 heures Entretien du pare-étincellesEnlever et remplacer l’élément du filtre Enlever le capuchon de la bougieRemisage à long terme Affûtage de la lameLame Shindaiwa Tornado Lame circulaire à plusieurs dentsSolution Guide de dépannageLE Moteur NE Démarre PAS Points à contrôlerGuide de dépannage suite Puissance InsuffisanteLe moteur surchauffe-t-il ? Le moteur cogneAutres Problèmes La présente garantie est administrée par Vos droits et obligations en vertu de la garantieCouverture de la garantie des fabricants Couverture de la garantieFR22 FR23

C242/EVC, 89302 specifications

The Shindaiwa 89302 C242/EVC is a powerful and efficient engine specifically designed for professional landscaping and outdoor maintenance. Renowned for its durability and performance, this unit stands out due to its innovative engineering and advanced features essential for tackling a variety of outdoor tasks.

One of the key features of the Shindaiwa C242/EVC engine is its lightweight construction. Weighing significantly less than many competitor models, it allows for easier maneuverability, particularly in time-sensitive applications such as lawn care, tree trimming, and agricultural work. This attribute is particularly beneficial for users who require prolonged usage without experiencing excessive fatigue.

The C242/EVC engine is equipped with Shindaiwa’s revolutionary 2-Stroke engine technology, which ensures a robust output while maintaining fuel efficiency. The engine’s advanced design allows for a higher power-to-weight ratio, making it ideal for heavy-duty tasks. Additionally, the unit incorporates an advanced cooling system that helps maintain optimal operating temperatures, thereby extending the engine's life and reducing downtime.

Another significant characteristic of the Shindaiwa C242/EVC is its user-friendly starting mechanism. The engine features an easy-start system that minimizes effort during ignition, enabling users to start their equipment quickly and efficiently, even in challenging conditions. This reliability is essential in professional environments where time is of the essence.

Furthermore, the Shindaiwa C242/EVC includes a sophisticated exhaust system designed to minimize emissions while maintaining optimal performance. This eco-friendly approach aligns with modern environmental standards, making it a suitable choice for landscape professionals who prioritize sustainability.

The unit also includes ergonomic handles, which are designed to provide comfort and control during operation. This feature reduces vibrations and helps operators maintain a firm grip, enhancing both precision and safety during use.

In summary, the Shindaiwa 89302 C242/EVC engine is a well-rounded solution for professionals seeking reliable, efficient, and powerful outdoor equipment. With its lightweight design, advanced engine technology, user-friendly features, and emphasis on eco-friendliness, it is an excellent choice for those committed to achieving high-quality results in landscaping and maintenance tasks. Its combination of performance, durability, and comfort positions the C242/EVC as a leader in the realm of outdoor power equipment.
Top Page Image Contents