Shindaiwa C242/EVC, 89302 Mixing fuel, Filling the fuel tank, Examples of 501 mixing quantities

Page 9

Mixing fuel

CAUTION

Never use any type of gasoline contain- ing more than 10% alcohol by volume! Some types of gasoline contain alcohol as an oxygenate. Oxygenated gaso- line may cause increased operating temperatures. Under certain condi- tions, alcohol-based gasoline may also reduce the lubricating qualities of some 2-cycle mixing oils.

Generic oils and some outboard oils should never be used in your Shindaiwa engine.

CAUTION

This engine is designed to operate on a 50:1 mixture consisting of unleaded gasoline and ISO-L-EGD or JASO FD class 2-cycle mixing oil only. Use of non-approved mixing oils can lead to excessive carbon deposits.

ŶUse only fresh, clean unleaded gasoline with a pump octane of 87 or higher.

ŶMix all fuel with a 2-cycle air-cooled mixing oil that meets or exceeds ISO-L- EGD and/or JASO FD classified oils at 50:1 gasoline/oil ratio.

CAUTION!

Mix and pour fuel outdoors where there DUHQRVSDUNVDQGÀDPHV

Examples of 50:1 mixing quantities

U.S.

METRIC

Gasoline

2-cycle

Gasoline

2-cycle

mixing oil

mixing oil

US Gallons

Fl.oz.

Liter

cc.

1

2.6

4

80

2

5.2

8

160

5

13

20

400

10

25.6

30

600

20

51.2

50

1000

50

128

100

2000

IMPORTANT!

Mix only enough fuel for your immediate needs! If fuel must be stored longer than 30

days and oil with fuel stabilizer is not used, it should first be treated with a fuel stabilizer such as STA-BIL™.

Oil is a registered JASO FD classi- fied oil and also meets or exceeds ISO-L-EGD performance requirements. Shindaiwa One is recommended for use in all Shindaiwa low emis- sions engines. Shindaiwa One also includes a fuel stabilizer.

Filling the fuel tank

WARNING!

Minimize the Risk of Fire

ŶNEVERVPRNHRUOLJKW¿UHVQHDUWKH engine.

ŶALWAYS stop the engine and allow it to cool before refueling.

ŶALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

ŶNEVERSODFHÀDPPDEOHPDWHULDO FORVHWRWKHHQJLQHPXIÀHU

ŶNEVER operate the engine with-

RXWWKHPXIÀHUDQGVSDUNDUUHVWHU screen in place and in good work- ing condition.

ŶFUEL IS HIGHLY FLAMMABLE.

ŶALWAYS store gasoline in a con-

WDLQHUDSSURYHGIRUÀDPPDEOH

liquids.

ŶALWAYS inspect the unit for fuel leaks before each use. During each

UH¿OOFKHFNWKDWQRIXHOOHDNVIURP around the fuel cap and/or fuel tank. If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

ŶALWAYS move the unit at least 3 meters (10 feet) away from a fuel

VWRUDJHDUHDRURWKHUUHDGLO\ÀDP- mable materials before starting the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before start- ing engine.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents English BrushcutterIntroduction ContentsSafety Labels SafetyWork Safely Stay AlertBe Aware of the Working Environment Properly Equipped OperatorProduct Description Do not make unauthorizedThese units or their components Handlebar Prior to Assembly AssemblyAdjust throttle lever free play Install the handlebarSub-Shield when trimmer head is in use Installing a Trimmer HeadCutting Attachment Shield Installing Brushcutter Blade Install blade holder B on the output shaftRemove the hex wrench Filling the fuel tank Mixing fuelExamples of 501 mixing quantities Minimize the Risk of FireStarting the Engine When the Engine StartsIdle Speed Adjustment Adjusting Engine IdleStopping the Engine Checking Unit ConditionOperation Brushcutter Shoulder Strap Using a bladeBlade Thrust Brushcutter HandlebarMaintenance 10/15 hour maintenance Hour maintenancePerform more frequently in dusty or Dirty conditions Gearcase lubricationRemove and replace the fuel filter element Every 135 hours of operation, remove and clean the mufflerBlade Sharpening Long Term StorageShindaiwa Tornado Blade Multiple-tooth Circular BladeEngine does not Start Troubleshooting GuideWhat To Check Possible CauseWhat To Check Possible Cause Remedy LOW PowerAdditional Problems Emission System Warranty Statement NOTAs Remarques 731-3167, Japan Desmalezadora Contenido IntroducciónDeclaraciones De Seguridad Etiquetas de seguridadTrabaje con cuidado SeguridadMantengase Alerta Etiquetas de seguridadEl operario debidamente equipado Seguridad continuaciónEsté alerta del area de trabajo Máquina descalzoC242 Descripción del ProductoEnsamblaje Mango tipo bicicleta Antes de EnsamblarAjuste la holgura del acelerador Protector del accesorio de corte Ensamblaje continuacionProtector Secundario cuando el Instalación del Cabezal de NylonInstalación de la cuchilla desmalezadora Llenando el Tanque de Combustible Mezcla de CombustibleEjemplos de cantidades de mezcla a proporción de Disminuya el riesgo de incendiosAl arrancar el motor Arranque del motorApgado del motor Arranque del motor continuaciónAjuste velocidad mínima del motor 9HULÀTXHODFRQGLFLyQGHODXQLGDGCorrea de Hombro OperaciónCorte de Césped Máquinas Equipadas con Cabezal de Corte BordesOperación continuación Mantenimiento Mantenimiento Cada 10 Horas Mantenimiento continuaciónMantenimiento Cada 10/15 Horas Mantenimiento Cada 50 HorasRetire el capuchón de la bujía Mantenimiento del silenciadorDisco Shindaiwa Tornado Almacenamiento de Largo PlazoDiscos de dientes múltiples Use aceite con estabilizador de combustibleEL Motor no Arranca Guia DiagnosticoQué revisar Posible causaBaja Potencia Guia Diagnostico continuación¿Se sobrecalienta el motor? Depósitos de carbonilla en el pistón o el silenciadorOtros Problemas Sus Derechos y Obligaciones de Garantía Esta garantía es administrada porCobertura de la Garantía del Fabricante Que Está Cubierto Por Esta GarantíaSP22 SP23 Tualatin, Oregon 97062 USA 11, Ozuka-Nishi Débroussailleuse Mises en garde Table des matièresSécurité au travail SécuritéDemeurer alerte Étiquettes de sécuritéSécurité suite Équipement complet de l’utilisateurTenir compte de l’environnement de travail Nomenclature Caractéristiques techniquesNe jamais effectuer des Avant l’assemblage AssemblageGuidon Réglage du jeu de la gâchette d’accélérationAssemblage suite PÁHFWHXUMontage de la tête de coupe 1HSDV¿HUGHODPHjXQ Installer le support de lame B sur l’ar- bre de sortieBre de sortie du carter renvoi d’angle De l’arbre du carter renvoi d’angleRemplissage du réservoir à carburant Mélange de carburantExemples de quantités de mélange de carburant à Réduire les risques d’incendieLorsque le moteur démarre Démarrage du moteurArrêt du moteur Démarrage du moteur suiteRéglage du ralenti du moteur Contrôle de l’état de l’appareilFonctionnement Fonctionnement suite Entretien Entretien toutes les 10 heures Entretien suiteEntretien toutes les 10 15 heures Enlever et nettoyer la bougieEntretien du pare-étincelles Entretien toutes les 50 heuresEnlever et remplacer l’élément du filtre Enlever le capuchon de la bougieAffûtage de la lame Remisage à long termeLame Shindaiwa Tornado Lame circulaire à plusieurs dentsGuide de dépannage SolutionLE Moteur NE Démarre PAS Points à contrôlerPuissance Insuffisante Guide de dépannage suiteLe moteur surchauffe-t-il ? Le moteur cogneAutres Problèmes Vos droits et obligations en vertu de la garantie La présente garantie est administrée parCouverture de la garantie des fabricants Couverture de la garantieFR22 FR23

C242/EVC, 89302 specifications

The Shindaiwa 89302 C242/EVC is a powerful and efficient engine specifically designed for professional landscaping and outdoor maintenance. Renowned for its durability and performance, this unit stands out due to its innovative engineering and advanced features essential for tackling a variety of outdoor tasks.

One of the key features of the Shindaiwa C242/EVC engine is its lightweight construction. Weighing significantly less than many competitor models, it allows for easier maneuverability, particularly in time-sensitive applications such as lawn care, tree trimming, and agricultural work. This attribute is particularly beneficial for users who require prolonged usage without experiencing excessive fatigue.

The C242/EVC engine is equipped with Shindaiwa’s revolutionary 2-Stroke engine technology, which ensures a robust output while maintaining fuel efficiency. The engine’s advanced design allows for a higher power-to-weight ratio, making it ideal for heavy-duty tasks. Additionally, the unit incorporates an advanced cooling system that helps maintain optimal operating temperatures, thereby extending the engine's life and reducing downtime.

Another significant characteristic of the Shindaiwa C242/EVC is its user-friendly starting mechanism. The engine features an easy-start system that minimizes effort during ignition, enabling users to start their equipment quickly and efficiently, even in challenging conditions. This reliability is essential in professional environments where time is of the essence.

Furthermore, the Shindaiwa C242/EVC includes a sophisticated exhaust system designed to minimize emissions while maintaining optimal performance. This eco-friendly approach aligns with modern environmental standards, making it a suitable choice for landscape professionals who prioritize sustainability.

The unit also includes ergonomic handles, which are designed to provide comfort and control during operation. This feature reduces vibrations and helps operators maintain a firm grip, enhancing both precision and safety during use.

In summary, the Shindaiwa 89302 C242/EVC engine is a well-rounded solution for professionals seeking reliable, efficient, and powerful outdoor equipment. With its lightweight design, advanced engine technology, user-friendly features, and emphasis on eco-friendliness, it is an excellent choice for those committed to achieving high-quality results in landscaping and maintenance tasks. Its combination of performance, durability, and comfort positions the C242/EVC as a leader in the realm of outdoor power equipment.
Top Page Image Contents