Shindaiwa 89302, C242/EVC manual Introduction, Contents

Page 2

Introduction

The Shindaiwa 242 series is designed and built to deliver superior performance and reliability without compromise to quality, comfort, safety or durability.

Shindaiwa engines represent the leading edge of high-performance engine technology, delivering exceptionally high power with remarkably low displacement and weight. As an owner/operator, you’ll soon discover for yourself why Shindaiwa is simply in a class by itself!

IMPORTANT!

The information contained in these instruc- tions describes units available at the time of publication.

Shindaiwa Inc. reserves the right to make changes to products without prior notice, and without obligation to make alterations to units previously manufactured.

WARNING!

The engine exhaust from this product contains chemicals known to the State of California to cause can- cer, birth defects or other reproduc- tive harm.

Contents

PAGE

PAGE

PAGE

Safety

3

Filling the fuel tank

9

Operation

12

Product Description

5

Starting the Engine

10

Maintenance

14

Specifications

5

Stopping the Engine

11

Long Term Storage

17

Assembly

6

Adjusting Engine Idle

11

Troubleshooting Guide

18

Mixing fuel

9

Checking Unit Condition

11

Warranty Statement

21

IMPORTANT!

The operational procedures described in this manual are intended to help you get the most from this unit as well as to protect you and others from harm. These procedures are guidelines for safe operation under most conditions, and are not intended to replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your unit, or if you do not understand something in this manual, contact your local authorized Shindaiwa dealer. You may also contact Shindaiwa Inc. at the address printed on the back of this Manual.

Attention Statements

Throughout this manual are special “atten- tion statements”.

DANGER!

A statement preceded by the triangular attention symbol and the word “DANGER” contains information that should be acted upon to prevent serious injury or death.

WARNING!

A statement preceded by the triangular attention symbol and the word “WARNING” contains informa- tion that should be acted upon to pre- vent serious bodily injury.

IMPORTANT!

A statement preceded by the word “IMPORTANT” is one that possesses spe- cial significance.

CAUTION!

A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent mechanical damage.

NOTE:

A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier.

Warning and Operational Labels

50FEET (15m)

Read and follow this operator's manual. Failure to do so could result in serious injury..

Wear eye and hearing protec- tion at all times during opera- tion of this unit. Wear head protection where there is a risk of falling objects.

Make sure no one is within 15 M / 50 feet of an operating machine.

Beware of thrown or richocheted objects

DO NOT operate this unit with a blade unless the unit is equipped with a Shindawia-approved handlebar or barrier.

Always wear a harness when operating this unit with a blade. A harness is also recommended when using trimmer line.

If unit is used as a brushcutter, beware of blade thrust. A jammed blade can cause the unit to jerk suddenly and may cause the operator to lose control of the unit.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Brushcutter EnglishContents IntroductionWork Safely SafetySafety Labels Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentThese units or their components Product DescriptionDo not make unauthorized Adjust throttle lever free play AssemblyHandlebar Prior to Assembly Install the handlebarCutting Attachment Shield Sub-Shield when trimmer head is in useInstalling a Trimmer Head Remove the hex wrench Installing Brushcutter BladeInstall blade holder B on the output shaft Examples of 501 mixing quantities Mixing fuelFilling the fuel tank Minimize the Risk of FireWhen the Engine Starts Starting the EngineStopping the Engine Adjusting Engine IdleIdle Speed Adjustment Checking Unit ConditionOperation Blade Thrust Using a bladeBrushcutter Shoulder Strap Brushcutter HandlebarMaintenance Perform more frequently in dusty or Dirty conditions Hour maintenance10/15 hour maintenance Gearcase lubricationEvery 135 hours of operation, remove and clean the muffler Remove and replace the fuel filter elementShindaiwa Tornado Blade Long Term StorageBlade Sharpening Multiple-tooth Circular BladeWhat To Check Troubleshooting GuideEngine does not Start Possible CauseLOW Power What To Check Possible Cause RemedyAdditional Problems Emission System Warranty Statement NOTAs Remarques 731-3167, Japan Desmalezadora Declaraciones De Seguridad IntroducciónContenido Etiquetas de seguridadMantengase Alerta SeguridadTrabaje con cuidado Etiquetas de seguridadEsté alerta del area de trabajo Seguridad continuaciónEl operario debidamente equipado Máquina descalzoDescripción del Producto C242Ajuste la holgura del acelerador EnsamblajeMango tipo bicicleta Antes de Ensamblar Protector Secundario cuando el Ensamblaje continuacionProtector del accesorio de corte Instalación del Cabezal de NylonInstalación de la cuchilla desmalezadora Ejemplos de cantidades de mezcla a proporción de Mezcla de CombustibleLlenando el Tanque de Combustible Disminuya el riesgo de incendiosArranque del motor Al arrancar el motorAjuste velocidad mínima del motor Arranque del motor continuaciónApgado del motor 9HULÀTXHODFRQGLFLyQGHODXQLGDGCorte de Césped Máquinas Equipadas con Cabezal de Corte OperaciónCorrea de Hombro BordesOperación continuación Mantenimiento Mantenimiento Cada 10/15 Horas Mantenimiento continuaciónMantenimiento Cada 10 Horas Mantenimiento Cada 50 HorasMantenimiento del silenciador Retire el capuchón de la bujíaDiscos de dientes múltiples Almacenamiento de Largo PlazoDisco Shindaiwa Tornado Use aceite con estabilizador de combustibleQué revisar Guia DiagnosticoEL Motor no Arranca Posible causa¿Se sobrecalienta el motor? Guia Diagnostico continuaciónBaja Potencia Depósitos de carbonilla en el pistón o el silenciadorOtros Problemas Cobertura de la Garantía del Fabricante Esta garantía es administrada porSus Derechos y Obligaciones de Garantía Que Está Cubierto Por Esta GarantíaSP22 SP23 Tualatin, Oregon 97062 USA 11, Ozuka-Nishi Débroussailleuse Table des matières Mises en gardeDemeurer alerte SécuritéSécurité au travail Étiquettes de sécuritéTenir compte de l’environnement de travail Sécurité suiteÉquipement complet de l’utilisateur Ne jamais effectuer des NomenclatureCaractéristiques techniques Guidon AssemblageAvant l’assemblage Réglage du jeu de la gâchette d’accélérationMontage de la tête de coupe Assemblage suitePÁHFWHXU Bre de sortie du carter renvoi d’angle Installer le support de lame B sur l’ar- bre de sortie1HSDV¿HUGHODPHjXQ De l’arbre du carter renvoi d’angleExemples de quantités de mélange de carburant à Mélange de carburantRemplissage du réservoir à carburant Réduire les risques d’incendieDémarrage du moteur Lorsque le moteur démarreRéglage du ralenti du moteur Démarrage du moteur suiteArrêt du moteur Contrôle de l’état de l’appareilFonctionnement Fonctionnement suite Entretien Entretien toutes les 10 15 heures Entretien suiteEntretien toutes les 10 heures Enlever et nettoyer la bougieEnlever et remplacer l’élément du filtre Entretien toutes les 50 heuresEntretien du pare-étincelles Enlever le capuchon de la bougieLame Shindaiwa Tornado Remisage à long termeAffûtage de la lame Lame circulaire à plusieurs dentsLE Moteur NE Démarre PAS SolutionGuide de dépannage Points à contrôlerLe moteur surchauffe-t-il ? Guide de dépannage suitePuissance Insuffisante Le moteur cogneAutres Problèmes Couverture de la garantie des fabricants La présente garantie est administrée parVos droits et obligations en vertu de la garantie Couverture de la garantieFR22 FR23

C242/EVC, 89302 specifications

The Shindaiwa 89302 C242/EVC is a powerful and efficient engine specifically designed for professional landscaping and outdoor maintenance. Renowned for its durability and performance, this unit stands out due to its innovative engineering and advanced features essential for tackling a variety of outdoor tasks.

One of the key features of the Shindaiwa C242/EVC engine is its lightweight construction. Weighing significantly less than many competitor models, it allows for easier maneuverability, particularly in time-sensitive applications such as lawn care, tree trimming, and agricultural work. This attribute is particularly beneficial for users who require prolonged usage without experiencing excessive fatigue.

The C242/EVC engine is equipped with Shindaiwa’s revolutionary 2-Stroke engine technology, which ensures a robust output while maintaining fuel efficiency. The engine’s advanced design allows for a higher power-to-weight ratio, making it ideal for heavy-duty tasks. Additionally, the unit incorporates an advanced cooling system that helps maintain optimal operating temperatures, thereby extending the engine's life and reducing downtime.

Another significant characteristic of the Shindaiwa C242/EVC is its user-friendly starting mechanism. The engine features an easy-start system that minimizes effort during ignition, enabling users to start their equipment quickly and efficiently, even in challenging conditions. This reliability is essential in professional environments where time is of the essence.

Furthermore, the Shindaiwa C242/EVC includes a sophisticated exhaust system designed to minimize emissions while maintaining optimal performance. This eco-friendly approach aligns with modern environmental standards, making it a suitable choice for landscape professionals who prioritize sustainability.

The unit also includes ergonomic handles, which are designed to provide comfort and control during operation. This feature reduces vibrations and helps operators maintain a firm grip, enhancing both precision and safety during use.

In summary, the Shindaiwa 89302 C242/EVC engine is a well-rounded solution for professionals seeking reliable, efficient, and powerful outdoor equipment. With its lightweight design, advanced engine technology, user-friendly features, and emphasis on eco-friendliness, it is an excellent choice for those committed to achieving high-quality results in landscaping and maintenance tasks. Its combination of performance, durability, and comfort positions the C242/EVC as a leader in the realm of outdoor power equipment.
Top Page Image Contents