Always wear a safety face shield or goggles.
Always wear heavy, long pants, boots and gloves. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair so it is above shoulder length.
Do not operate this unit/machin when you are tired, ill or under the influence of alcohol, drugs or medication.
Never let a child or inexperienced person operate the machine.
Wear hearing protection.
Never start or run the engine inside a closed room or building. Breathing exhaust fumes can kill.
Keep handles free of oil and fuel.
Keep hands away from drilling equipment.
Do not grab or hold the unit by the drilling equipment.
When the unit is turned off, make sure the drilling attachment has stopped before the unit is set down.
When operation is prolonged, take a break from time to time so that you may avoid possible whitefinger disease which is caused by vibration.
Inspect the entire unit/machine before each use. Replace damaged parts. Check for fuel leaks and make sure all fasteners are in place and securely tightened.
Replace parts that are cracked, chipped or damaged in any way before using the unit/machine.
Keep others away when making carburetor adjustments.
Use only accessories as recommended for this unit/machine by the manufacturer.
Mix and pour fuel outdoors and where there are no sparks or flames.
Use a container approved for fuel.
Do not smoke or allow smoking near fuel or the unit/machine or while using the unit/machine.
Wipe up all fuel spills before starting engine.
Move at least 3 m away from fueling site before starting engine.
Stop engine before removing fuel cap.
Empty the fuel tank before storing the unit/machine. It is recommended that the fuel be emptied after each use. If fuel is left in the tank, store so fuel will not leak. 
Store unit/machine and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces. etc.
WARNING!
Do not drill any material other than that for which is intended.
Inspect the area to be drilled before each use. Remove objects which can be thrown or become entangled.
For respiratory protection, wear an aerosol protection mask when drilling the area after insecticide is scattered.
Keep others including children, animals, bystanders and helpers outside the 5 m hazard zone. Stop the engine immediately if you are approached.
Hold the unit/machine firmly with both hands.
Keep firm footing and balance. Do not 
Keep all parts of your body away from the muffler and drilling attachment when the engine is running.
Maintain the unit/machine according to recommended procedures.
Disconnect the spark plug before performing maintenance except for carburetor adjustments.
Keep others away when making carburetor adjustments.
Use only genuine Tanaka replacement parts as recommended by the manufacturer.
Carry the unit/machine by hand with the engine stopped and the muffler away from your body.
Allow the engine to cool, empty the fuel tank, and secure the unit/machine before storing or transporting in a vehicle.
Empty the fuel tank before storing the unit/machine, It is recommended that the fuel be emptied after each use. If fuel is left in the tank, store so fuel will not leak.
Store unit/machine out of the reach of children.
Clean and maintenance the unit carefully and store it in a dry place
Make sure engine switch is off when transporting or storing.
When transporting in a vehicle, cover bit with bit cover or rug.
WARNING!TED-270PFL/PFLS, TED-270PFL, TED-270PFLS, TED-270PFR, TED-270PFRS, TED-270PFHS, TED-270PFDH, TED-270PFDLS, TED-270PFR/PFRS, TED-270PFDLS specifications
The Tanaka TED-270 series is a collection of high-performance brushcutters, designed for both professional landscapers and home gardeners. Ranging from the TED-270PFL to the TED-270PFRS, each model inherits robust engineering principles while offering unique features tailored to specific user requirements.At the heart of these models is an efficient 26.9cc two-stroke engine, delivering powerful performance for cutting through thick grass, weeds, and underbrush. The engine is designed with a focus on fuel efficiency, promoting longer operational times and reducing the frequency of refueling. The lightweight construction, typically around 10.6 lbs, enhances portability, making these brushcutters easy to maneuver around gardens and larger landscapes.
The TED-270PFL and TED-270PFLS models are equipped with a straight shaft design that allows for extended reach, making it simpler to clear hard-to-reach areas such as beneath fences or around trees. These models also incorporate a quick-release harness system, providing additional comfort and support during extended use.
In contrast, the TED-270PFR and TED-270PFRS models feature a curved shaft design, which enables better handling and control. This design is particularly favored by users who prioritize ease of use over extended reach. The curved shaft models are adept at maintaining precision when trimming grass along edges and in tighter spaces.
The TED-270PFHS, TED-270PFDH, and TED-270PFDLS versions come with added versatility, pairing the powerful engine with various cutting attachments, including brush blades, string trimmers, and more. This adaptability allows users to switch quickly between different cutting tasks with minimal downtime.
All models in the TED-270 series share key technologies, such as easy-start systems that minimize starting effort, anti-vibration features to reduce operator fatigue, and advanced air filtration systems that prolong engine life by keeping harmful debris out.
Moreover, these brushcutters comply with stringent emissions regulations, ensuring lower environmental impact while maintaining high performance. The robust and ergonomic design ensures that the Tanaka TED-270 series is not just efficient but also user-friendly, catering to both novices and seasoned professionals in the landscaping field.
With their combination of power, versatility, and user-centric features, the Tanaka TED-270 series stands out as a reliable choice for anyone looking to achieve professional-grade results in their landscaping endeavors.