Assembly procedures, Operating procedures, Fuel Fig

TED-270

Fig.1-1	Fig.1-1B	Fig.1-1C

Fig.1-1D

Fig.2-1

3. Assembly procedures

Assembling (Fig. 1-1, 1B, 1C)

1.Assemble the handle (1) witch is supplied with the unit to the gear case.

2.Screw the chuck unit (2) into the drive shaft (clockwise) after the collar B (3) has been installed. (if so equipped)

3.Insert the drill bit to be used after opening the chuck by the chuck handle (4) and tighten the chuck by the handle.

NOTE!

If the keylesschuck is equipped, loosen chuck and insert drill bit. Then tighten chuck by turning clockwise till making “click” noise (Fig.1-1D)

Selection of a Suitable Bit

Choose a drill bit according to material to be drilled.

4. Operating procedures

Fuel (Fig. 2-1)

WARNING!

The power drill is equipped with a two- stroke engine. Always run the engine on fuel, which is mixed with oil.

Provide good ventilation, when fueling or handling fuel.

Fuel

Always use branded 89 octane unleaded gasoline.

Use genuine two-cycle oil or use a mix between 25:1 to 50:1, please consult the oil bottle for the ratio or Tanaka dealer

Only for the state of California at 50:1.

If genuine oil is not available, use an anti- oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use(JASO FC GRADE OIL or ISO EGC GRADE). Do not use BIA or TCW (2-stroke water-cooling type) mixed oil.

Never use multi-grade oil (10 W/30) or waste oil.

Always mix fuel and oil in a separate clean container.

Always start by filling half the amount of fuel, which is to be used. Then add the whole amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of fuel.

Mix (shake) the fuel-mix thoroughly before filling the fuel tank.

Fueling

WARNING!

Always shut off the engine before refueling.

Slowly open the fuel tank, when filling up with fuel, so that possible over-pressure disappears.

Tighten the fuel cap carefully, after fueling. Always move the unit at least 3 m (10 ft.) from the fueling area before starting.

Before fueling, clean the tank cap area carefully, to ensure that no dirt falls into the tank. Make sure that the fuel is well mixed by shaking the container, before fueling.

GB-6

TED-270PFL/PFLS, TED-270PFL, TED-270PFLS, TED-270PFR, TED-270PFRS, TED-270PFHS, TED-270PFDH, TED-270PFDLS, TED-270PFR/PFRS, TED-270PFDLS specifications

The Tanaka TED-270 series is a collection of high-performance brushcutters, designed for both professional landscapers and home gardeners. Ranging from the TED-270PFL to the TED-270PFRS, each model inherits robust engineering principles while offering unique features tailored to specific user requirements.

At the heart of these models is an efficient 26.9cc two-stroke engine, delivering powerful performance for cutting through thick grass, weeds, and underbrush. The engine is designed with a focus on fuel efficiency, promoting longer operational times and reducing the frequency of refueling. The lightweight construction, typically around 10.6 lbs, enhances portability, making these brushcutters easy to maneuver around gardens and larger landscapes.

The TED-270PFL and TED-270PFLS models are equipped with a straight shaft design that allows for extended reach, making it simpler to clear hard-to-reach areas such as beneath fences or around trees. These models also incorporate a quick-release harness system, providing additional comfort and support during extended use.

In contrast, the TED-270PFR and TED-270PFRS models feature a curved shaft design, which enables better handling and control. This design is particularly favored by users who prioritize ease of use over extended reach. The curved shaft models are adept at maintaining precision when trimming grass along edges and in tighter spaces.

The TED-270PFHS, TED-270PFDH, and TED-270PFDLS versions come with added versatility, pairing the powerful engine with various cutting attachments, including brush blades, string trimmers, and more. This adaptability allows users to switch quickly between different cutting tasks with minimal downtime.

All models in the TED-270 series share key technologies, such as easy-start systems that minimize starting effort, anti-vibration features to reduce operator fatigue, and advanced air filtration systems that prolong engine life by keeping harmful debris out.

Moreover, these brushcutters comply with stringent emissions regulations, ensuring lower environmental impact while maintaining high performance. The robust and ergonomic design ensures that the Tanaka TED-270 series is not just efficient but also user-friendly, catering to both novices and seasoned professionals in the landscaping field.

With their combination of power, versatility, and user-centric features, the Tanaka TED-270 series stands out as a reliable choice for anyone looking to achieve professional-grade results in their landscaping endeavors.

Fig.1-1B

Fig.1-1C