Cleaning the SpeedSpool, SpeedSpool Replacement Parts

SECTION 7: MAINTENANCE AND REPAIR INSTRUCTIONS

2.Pull the old inner reel with existing line from the outer spool.

3.Insert the ends of the prewound inner reel line into the outer spool eyelets. See Figure 22. Push the new inner reel, arrow side up, into the outer spool.

4.Remove any existing line from the inner reel before cleaning. Remove any debris or grass from the knob, spring, inner reel and foam seal. Wash the inner reel with warm soapy water. See Figure 24.

Holding Slots

Figure 22

4.Hold the inner reel in place and install the bump knob, spring and foam seal. Press down and turn the bump knob clockwise. Grasp the ends and pull firmly to release the line from the holding slots in the inner reel. See Figure 20.

Releasing the Inner Reel

If the SpeedSpool® does not release line correctly, pull the ends of the line firmly from the spool. See Figure 20. If this does not the release line, follow the Cleaning the SpeedSpool® instructions.

Cleaning the SpeedSpool®

Cleaning the SpeedSpool® may be necessary if:

•A jammed or excessive line must be removed

•The SpeedSpool® becomes difficult to wind or does not operate correctly when bumping the head on the ground

1.Hold the outer spool, and unscrew the bump knob counterclockwise. See Figure 23.

2.Pull out the bump knob, spring and foam seal.

Inner Reel

Figure 24

5.Clean the shaft and the inner surface of the outer spool. To clean the shaft underneath the plunger, press down on the plunger. See Figure 25. Remove any dirt or debris from the shaft.

Shaft

Plunger

Figure 25

NOTE: The inner reel must be totally dry before reinstalling it into the outer spool. Do not lubricate the inner reel or outer spool assembly.

6.Place the inner reel into the outer spool.

7.Place the bump knob, spring and foam seal into the inner reel. See Figure 21.

8.Press the bump knob down and tighten clockwise.

9.Install new line as described in Line Installation for the SpeedSpool®.

SpeedSpool® Replacement Parts

Refer to the Accessories/Replacement Parts section.

Figure 23

3.Pull the inner reel with existing line from the outer spool. See Figure 22.

YM75 specifications

The MTD YM75 is a compact and efficient tractor designed for a variety of agricultural and landscaping tasks. Known for its versatility and robust performance, the YM75 is favored by many small-scale farmers and landowners looking to enhance their productivity.

One of the standout features of the MTD YM75 is its powerful engine. The tractor is equipped with a reliable diesel engine that has a displacement of 1.7 liters, delivering around 75 horsepower. This impressive power allows the YM75 to tackle tough tasks such as plowing, tilling, and hauling materials with ease. The efficiency of its engine not only provides ample power but also ensures lower fuel consumption, making it economical for long-term use.

The MTD YM75 incorporates advanced technologies that make it user-friendly and efficient. The tractor features a synchronized transmission system, allowing for smooth gear shifts and precise control over speed and torque. This is particularly beneficial when operating various implements or navigating challenging terrains. Additionally, the tractor's compact design enables it to maneuver effortlessly in tight spaces, making it suitable for small farms and gardens.

The hydraulic system of the YM75 is another highlight, boasting a high lifting capacity. This enables the attachment of various implements, such as front loaders, backhoes, and other tools, enhancing the tractor's versatility. The hydraulic setup is designed to be responsive, providing operators with the ability to control attachments with precision.

In terms of operator comfort, the MTD YM75 does not disappoint. It features an ergonomic cabin with adjustable seating, providing a comfortable driving experience even during long working hours. The controls are intuitively placed, allowing for easy access and minimizing distractions while operating the machinery.

Durability is a key characteristic of the MTD YM75. Built with high-quality materials and robust construction, this tractor is designed to withstand the rigors of daily agricultural work. Its rugged tires ensure excellent traction and stability on various terrains, contributing to its overall reliability.

In summary, the MTD YM75 is a powerful, versatile, and user-friendly tractor that meets the needs of modern farmers and landscapers. With its efficient engine, advanced hydraulic system, ergonomic design, and durability, it stands out as an excellent choice for enhancing productivity in any agricultural setting. Whether for tilling the land or managing landscaping projects, the YM75 proves to be an invaluable asset.