Multiquip operation manual DCA-125USJ 50 HZ- Output Terminal Panel Familiarization

DCA-125USJ (50 HZ)— OUTPUT TERMINAL PANEL FAMILIARIZATION

Output Terminal Panel

The OutputTerminal Panel (Figure 8) shown below is located on the right-hand side (left from control panel) of the generator. Lift up on the cover to gain access to receptacles and terminal lugs.

NOTE	Terminal legs “O” and “Ground” are
	considered bonded grounds.

Output Terminal Familiarization

The “OutputTerminal Panel ” (Figure 8) is provided with the

following:

zThree (3) 100/200V output receptacles @ 50 amp

zThree (3) Circuit Breakers @ 50 amps

zTwo (2) 100V GFCI receptacles @ 20 amp

zTwo (2) GFCI Circuit Breakers @ 20 amps

zFive (5) Output Terminal Lugs ( U, V, W, O, Ground)

Figure 8. Output Terminal Panel

PAGE 26 — DCA-125USJ (50 HZ) — OPERATION AND PARTS MANUAL — REV. #0 (03/11/05)