Continued from Figure 8-6:
To enter SAVE mode.
Display : *
S A V E
Note: Be sure to save your settings before exiting the configuration mode. The controller reverts to the last saved settings when the master switch is moved to the OFF/RESET position.
There are 3 options when the display says SAVE:
Press:
To return to the first parameter, coarse voltage adjustment, to check or change settings before saving. See Figure
or
To save changes.
or
To discard changes without saving.
“Yes”or “no” flashes when the up or down arrow is pressed and then the controller exits the configuration mode. The display returns to the runtime hours.
S A V E
1 P x x
Y E S
n o
x x x x
Now move the master switch to OFF/RESET.
*x in the examples above denotes any number from 0 to 9. The actual values may vary from
Figure 8-7 Output Voltage Adjustments, Continued
Reconnection/Adjustments 31 |