Homelite UT43102 Operation, Applications, Adding BAR and Chain Lubricant, OIL Reservoir CAP

Page 13

ASSEMBLY

WARNING:

Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious per- sonal injury.

OPERATION

DANGER:

Never use near power lines or other electric sources. Contact with power lines or electric sources will result in death by electrocution or serious injury.

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict seri- ous injury.

CHAIN

LUBRICANT

OIL RESERVOIR

CAP

QUICK VIEW

OIL INDICATOR

Fig. 7

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with head protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING:

Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

Basic limbing, felling, and woodcutting

Removing buttress roots

ADDING BAR AND CHAIN LUBRICANT

See Figure 7

Use HOMELITE Bar and Chain Lubricant. It is designed for chains and chain oilers, and is for- mulated to perform over a wide temperature range with no dilution required.

NOTE:  Chain saw comes from the factory with no bar and chain oil added. Level should also be checked after every 20 minutes of use and refilled as needed.

nRemove oil cap.

nCarefully pour the bar and chain oil into the tank.

nWipe off excess oil.

nCheck and fill the oil tank when quick view oil indicator is below the second to last indicator line.

nRepeat as needed.

NOTE: Do not use dirty, used or otherwise contaminated oils. Damage may occur to the bar or chain.

Page 13 — English

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Save this Manual for Future Reference Manuel D’UTILISATION Manual DEL OperadorALL Versions Toutes LES Versions Todas LAS Versiones Introduction Table of ContentsRead ALL Instructions Basic Safety Precautions General Safety Rules4 English See Figures 1 KickbackRotational Kickback SAFE-T-TIPNOSE GuardSAFE-T-TIPANTI-KICKBACK Nose Guard Understanding Your Chain SAW Safety DevicesLOW Kickback SAW Chain Guide BarsSymbol Signal Meaning Symbols8 English Double Insulation FeatureselectricalElectrical Connection Extension CordsBar Tip Guard Glossary of TermsProduct Specifications FeaturesAssembly Operation OIL IndicatorApplications Adding BAR and Chain LubricantSwitch Connecting to Power SupplyStarting and Stopping the Chain SAW Preparing for CuttingProper Grip Proper Cutting StanceProper Procedure for Tree Felling Work Area PrecautionsFelling Trees Hazardous Conditions See Figures 13Hinge Planned Line FallNotch Approx /3 Diameter Trunk Bucking Removing Buttress RootsHinge Back CUT Wedge Vertical Loose Section Bucking Logs Under Stress Bucking with a WedgeOverbucking UnderbuckingCutting Springpoles PruningLimbs Under Tree Until LOG is CUT Springpole General Maintenance MaintenanceLubrication Replacing the Guide BAR and ChainCutters Chain Rotation Chain Drive Links Flats on Drive Links Adjusting the Chain TensionSee Figures 34 See Figures 36 Chain MaintenanceRaker Depth Gauge Clearance Inspect Drive SprocketSee Figures 38 Sharpening the CuttersSide Plate Angle TOP Plate Filing AngleMaintaining Depth Gauge Clearance SeeMounting the SAFE-T-TIP Nose Guard Maintaining the Guide BARMaintaining the SAFE-T-TIP Nose Guard See Figures 48Model UT43122 only Storing the ProductZipper BAR and Chain Combinations TroubleshootingLimited Warranty Statement WarrantyAVERTISSEMENT  Règles DE Sécurité Générales4 Français Rebond AvertissementRebond Rotatif LA Protection SAFE-T-TIP Pour LAChaîne À Rebond Réduit Garde Antirebond SAFE-T-TIPGuides Voir la figureSymbole Signal Signification SymbolesNombre Denominación / Explicación Isolation Double CaractéristiquesfonctionsélectriquesConnexion Électrique Cordons ProlongateursProtection de nez de guide GlossaireSpécifications CaractéristiquesSAFE-T-TIP Gâchette ­ Cordon ’ALIMENTATION Poignée ArrièreAssemblage Appoint D’HUILE Pour Guide ET Chaîne UtilisationBouchon DE Réservoir ’HUILE Démarrage ET Arrêt DE LA Scie À Chaîne Branchement SUR UNE Prise SecteurRetenue DE Cordon Verrouillage DU COMMUTATEUR­ Gâchette ­Prise Correcte Position DE Coupe CorrecteAbattage D’ARBRES Situations Dangereuses AVERTISSEMENT  Précautions À Prendre SUR LE Lieu DE TravailMéthode Correcte D’ABATTAGE OU 1/10 ÈME DU Diamètre Ligne DE Chute PrévueTronçonnage Avec Coins Élimination DES Racines ÉchassesCoupe PAR LE Dessus Débitage DE Billes Sous ContrainteCoupe PAR LE Dessous ÉbranchageCoupe DE Fouets ÉlagageCELUI-CI Soit Débité Fouet Entretien Remplacement DU Guide ET DE LA ChaîneEntretien Général LubrificationDents Voir les figures 34 et Réglage DE LA Tension DE ChaîneVoir les figures 36 et Entretien DE LA ChaîneMéplats DES Maillons ’ENTRAÎNEMENT JEU DU Limiteur DE ProfondeurVoir les figures 38 à Affûtage DES DentsTalonnage Sabot Creux Angle DE Plaque Latérale Angle D’AFFÛTAGE DE LA Plaque SupérieureDents DE Gauche Droite Crochet Angle Arrière IncorrectMaintien DU JEU DU Limiteur DE Profondeur Installation DE LA Garde SAFE-T- TIPEntretien DU Guide Voir les figures 44 àRemisage LE Produit Entretien DE LA Garde SAFE-T-TIPVoir les figures 47 et VIS DE Montage SAFE-T-TIPDépannage Combinaisons DE Guide ET ChaîneDéclaration DE Garantie Limitée GarantieAdvertencia Reglas DE Seguridad GeneralesPágina 4 Español Contragolpe Rotatorio LA Barra Aparece SIN LA ContragolpeZona DE Peligro DE Contragolpe Barras Guía SAFE-T-TIP DE LA PuntaTirón Empuje SAFE-T-TIP Símbolo Señal Significado Peligro SímbolosPágina 8 Español Doble Aislamiento AspectosfeatureseléctricosConexión Eléctrica Cordones DE ExtensiónProtección de la punta de la barra Glosario DE TérminosEspecificaciones DEL Producto CaracterísticasSeguro DE Apagado DEL Interruptor Gatillo DEL SAFE-T-TIP Armado Aplicaciones FuncionamientoIndicador DE Nivel DE Aceite Tapa DEL Tanque Corriente Conexión AL Suministro DEEncendido Y Apagado DE LA Motosierra Preparación Para EL Corte Sujeción Correcta DE LOS MangosProcedimientos Básicos DE Funcionamiento Y Corte Postura Correcta Para EL CorteTala DE Árboles Condiciones Peligrosas Advertencia Precauciones Relacionadas CON EL Área DE TrabajoLínea Planeada DE Caída SeguraMuesca Procedimiento Correcto Para Talar ÁrbolesDiámetro DEL Tronco Corte BisagraTronzado Eliminación DE Raíces ZancasCorte Vertical Parte Suelta Horizontal Contragolpe Cuña Tronzado DE Troncos Bajo Tensión Tronzado CON CuñaTronzado POR Arriba Tronzado POR AbajoCorte DE Pértigas PodaCarga Segundo Corte Primer Diámetro Corte FinalMantenimiento General MantenimientoCómo Reemplazar LA Barra Guía Y LA Cadena LubricaciónEslabones DE Impulsión DE LA Cadena PrecauciónOrificio DE LA Espiga Tensora DE LA Cadena Tapa DEL Cadena DE Perilla DE BloqueoVea las figuras 34 y Ajuste DE LA Tensión DE LA CadenaVea las figuras 36 y Mantenimiento DE LA CadenaPartes Planas DE LOS Eslabones DE Impulsión Calibres DE ­PROFUNDIDADVea las figuras 38 a Afilado DE LOS Dientes DE CorteÁngulo DE LA Placa Lateral Ángulo DE Limadura DE LA Placa SuperiorMontaje DE LA Protección SAFE- T-TIP DE LA Punta Mantenimiento DE LA Barra GuíaCalibres DE Profundidad Cremallera Almacenamiento DE LA ProductoCombinaciones DE Barra Y Cadena Solución DE ProblemasDeclaración DE LA Garantía Limitada Garantía/ Página Manuel D’UTILISATION Manual DEL Operador OPERATOR’S ManualHomelite Consumer PRODUCTS, INC

UT43102, UT43122 specifications

The Homelite UT43122 and UT43102 are two powerful and efficient string trimmers designed to meet the needs of both homeowners and landscaping professionals. Known for their reliability and performance, these trimmers come equipped with features that enhance user experience and job effectiveness.

At the heart of both models is a robust, high-performance electric motor that provides ample power for cutting through thick grass and weeds. The UT43122 features a 12 Amp motor, while the UT43102 has an equally impressive 10 Amp motor. These electric motors facilitate quick start-ups with minimal noise, offering a more environmentally friendly alternative to gas-powered trimmers. This makes them ideal for use in residential areas where noise restrictions may be in place.

One of the standout features of the Homelite UT43122 and UT43102 is their innovative Auto Feed String System. This technology ensures that the line is automatically advanced as needed, allowing for continuous cutting without the hassle of manual adjustments. As a result, users can focus on trimming rather than stopping to reload the line, which significantly increases productivity.

Both models are equipped with a 15-inch cutting path, enabling them to cover more ground in less time. This cutting width is augmented by a dual-line nylon string that offers superior cutting power. Additionally, the adjustable telescoping shaft allows users to customize the length of the trimmer to their preferred height, enhancing comfort during extended use.

Furthermore, the Homelite UT43122 and UT43102 boast a lightweight design, making them easy to maneuver around landscapes. The ergonomic handle features a comfortable grip, reducing fatigue during prolonged operation. These characteristics make them suitable for both professional landscapers tackling large areas and homeowners maintaining their yards.

In terms of durability, the construction of the Homelite trimmers is robust, ensuring they can withstand the rigors of outdoor use. The inclusion of a guard also protects the user from debris, promoting safety during operation.

In summary, the Homelite UT43122 and UT43102 string trimmers are equipped with powerful motors, an automatic feed system, and user-friendly features. Their lightweight design, adjustable shafts, and durable construction make them suitable for various trimming tasks, making them a valuable addition to any lawn care toolkit. Whether for professional use or home gardening, these trimmers deliver efficiency and effectiveness in tackling tough yard work.
Top Page Image Contents