Black & Decker LST136 Important Charging Notes, State of charge indicator figure B

Page 7

Important Charging Notes

1. Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 60°F and 80°F (16°- 27°C). DO NOT charge the battery pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

2. The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

3. If the battery pack does not charge properly:

a. Check current at receptacle by plugging in a lamp or other appliance

b. Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

c. Move charger and battery pack to a location where the surrounding air temperature is approximately 60°F - 80°F (16° - 27°C).

d. If charging problems persist, take the tool, battery pack and charger to your local service center.

State of charge indicator (figure B)

The battery is equipped with a state

B

B1

of charge indicator. This can be used

to display the current level of charge

B2

 

in the battery during use and during

 

charging. It does not indicate tool

 

 

functionality and is subject to variation

 

 

based on product components,

 

 

temperature and end-user application.

 

 

Checking state of charge during use:

 

 

• Press the state of charge indicator

 

 

button (B1).

 

 

• The four LED’s (B2) will illuminate

 

 

indicating the percent of charge in

 

 

the battery. See chart in figure B.

 

 

• If LED light does not illuminate,charge battery.

 

Installing and Removing the Battery Pack

WARNING: Make certain the lock-off button is engaged to prevent switch actuation before removing or installing battery.

4. The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also charge a partially used pack whenever you desire with no adverse affect on the battery pack.

5. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

6. Do not freeze or immerse charger in water or any other liquid. WARNING: Shock hazard. Do not allow any liquid to get

inside charger. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.

To install battery pack: Insert battery pack into tool until fully seated and an audible click is heard (figure C). Make sure battery pack is fully seated and fully latched into position.

To remove battery

pack: Depress the battery release button in the back of the battery pack and pull battery pack out of tool.

C

7

Image 7
Contents VEA EL Espanol EN LA Contraportada Save this manual for future referencePour LE FRANÇAIS, Voir LA Couverture ARRIÈre Important Safety Warnings Instructions Table of ContentsMinutes WattsPower Command On/Off SwitchBattery Charge IndicatorImportant safety instructions For battery packs Leaving the battery in the charger Charging ProcedureBad battery Hot/Cold pack delayChecking state of charge during use State of charge indicator figure BInstalling and Removing the Battery Pack Important Charging NotesAttaching the guard Assembly & AdjustmentAssembly Tools Required not Supplied Adjusting the position of the auxilIary handle fig. GOPERATING INSTRUCTIONS Adjusting the height Tool figure HTrimming mode Edging mode figure KOPERating the Trimmer Switching on and offPOWER COMMAND Max Power / Max RuntimeCould be hazardous Replacement accessoriesREPLACING THE SPOOL REPLACING THE SPOOL Rewinding SpoolRbrc Seal Lever in the spool housing can Check that the spool housingCarefully clean the spool HousingOverfeeding Line unravels when cap or spool is removed Trouble shootingFull three-year home use warranty Mode D’EMPLOI Lignes directrices en matière de sécurité définitions Conserver ces mesures Protéger le chargeur de la pluie et de la neige Adéquat AWG, American Wire Gauge calibrage américainMise EN Garde dans certaines circonstances, lorsque le NettoyageDirectives DE Sécurité Importantes Pour LES BLOCS-PILES Calibre de fil minimum recommandé pour les rallongesLorsque le chargeur détecte qu’une pile est excessivement Procédure de chargePile en mauvais état Fonction de suspension du bloc-piles chaud/froidLa détente avant la pose ou le retrait de la pile Installation du bloc-pilesPile laissée dans le chargeur Remarques importantes sur le chargementRégler LA Position DE LA Poignée Auxiliaire FIG. G Montage et réglageFixation du pare-main figures D et E Fixation de la poignée auxiliaire figures F et GLibération du fil de coupe Mode de taillageMode de coupe-bordures figure K Réglage de la hauteur de ’outil figure HCoupe en bordure Mise en marche et arrêtFonctionnement DU TAILLE-BORDURES Puissance max./durée d’exécution maxDE LA BOBINE figures P Et R Accessories DE RECHANGERemplacement Consejos Útiles Para CortarBlack & Decker Rembobiner LA Bobine utiliser uniquement un filROND de 1,65 mm 0,065 po de diamètre figures S, T et U Le sceau Srprc MCEntretien INFORMATION SUR LES REPARATION Si tiene una consulta o algún inconveniente con su producto Manual DE InstruccionesProtector nunca utilice esta herramienta sin el protector Advertencias E Instrucciones Importantes Sobre SeguridadNo Opere herramientas eléctricas portátiles en atmósferas Guarde LAS Herramientas QUE no SE Utilicen EN ComponentesConserve Estas Instrucciones Lea todas las instrucciones Procedimiento de carga Cargue los paquetes de baterías solamente en cargadoresBatería dañada Indicador DEL Estado DE LA Carga Figura B Retraso por paquete caliente/fríoDejar el paquete de baterías en el cargador Notas importantes sobre la cargaHerramientas Necesarias Para EL Ensamblaje no Suministradas Montaje y AjusteInstalación Y Extracción DEL Paquete DE Baterías Para Instalar EL Paquete DE BateríasInstrucciones DE OPERACIÓN Modo DE Bordeado Figura K Encendido Y ApagadoMáxima POTENCIA/MÁXIMO Tiempo DE Funcionamiento Bordeado Accesorios DE RepuestoFuncionamiento DE LA Podadora Cuerda DE CORTE/ALIMENTACIÓN DE LA CuerdaPulgada DE Diámetro REEMPLAZO DEL CARRETE Figuras P, Q Y RRebobinado DEL Carrete Utilice Únicamente Cuerda REDONDA DE 1,7 MM 0,0065Muestra en la Figura T. Asegúrese de que MantenimientoLa línea se tensa contra el carrete como se La alimentación automática de DETECCION DE PROBLEMASLa herramienta Funciona lentamenteProblema Esta Garantia no Aplica Cuando Solamente Para Propositos DE Mexico Page Copyright 2013 Black & Decker Cat. No. LST136 Form No
Related manuals
Manual 48 pages 8.15 Kb

LST136 specifications

Black & Decker has long been a trusted name in power tools and outdoor equipment, and their line of string trimmers is no exception. Among their notable offerings are the LST136, LST136-36V, and LST136R models. Each trimmer brings unique features and technologies to the table, designed to cater to a variety of gardening and landscaping needs.

The Black & Decker LST136 is a versatile cordless string trimmer powered by a 40V lithium-ion battery. This model is designed for ease of use and efficiency, making it an ideal choice for homeowners looking to maintain their lawns without the hassle of cords or gas. One of its standout features is the automatic feed spool, which ensures a continuous supply of line without the need for manual adjustments. Additionally, the trimmer offers a dual-line system for enhanced cutting performance, allowing you to tackle tougher weeds and thicker grass with ease.

The LST136-36V is a slightly more advanced version, boasting a 36V lithium-ion battery that provides longer run times and more power. This model is perfect for those who need a bit more oomph in their trimming tasks. It also features an adjustable height and handle, ensuring user comfort during extended use. The LST136-36V is designed for maneuverability, with a lightweight construction that makes it easy to navigate around flower beds, fences, and other obstacles in the yard.

Lastly, the LST136R offers a robust set of features, including a bump feed system that allows operators to release additional line with a simple tap on the ground. This model is also equipped with a 40V lithium-ion battery, similar to the LST136, and provides ample power for a variety of trimming jobs. The LST136R stands out with its ergonomic design, which prioritizes user comfort and reduces fatigue during long trimming sessions. Its built-in battery indicator lets users know how much charge is left, ensuring that you don’t run out of power mid-job.

In summary, the Black & Decker LST136, LST136-36V, and LST136R string trimmers each combine power, efficiency, and user-friendly features. Whether you’re a casual homeowner or a serious gardener, these trimmers provide reliable performance to keep your outdoor spaces looking their best. With innovations like automatic feed spools, adjustable settings, and lightweight designs, Black & Decker continues to lead the charge in outdoor power equipment.