Arrow Plastic VL8662-A, WL86-A, LM86, EH86S, EH86-A, SA8662-A, ML86-A owner manual Roof Trim

Page 29

Step 16	● Parts Needed For ●
Step 16	Roof Trim
B29

●8482 Side Roof Trim (2)

1 Attach the side roof trim to the

lower end of the roof panels on each side of the building using screws at each panel overlap.

2 Using your thumb and index fin- ger, overbend the bottom flange of the side roof trim and roof panel rib at the corner inward enough so the right and left roof trim caps fit onto right and left corners.

3 Fasten the roof trim caps to the

side trim using a screw.

4 Fasten the roof panel ribs, peak

caps and ridge cap together using bolts and nuts.

STEP
3	Side Roof Trim

Roof Trim Cap

8482

Peak Cap

STEP

8482

STEP

Tuck Flange Inward to Fit Inside of Roof Trim Cap

Image 29

Contents EH86S Before YOU Begin Required Eye Goggles No Phillips Screwdriver Plan AheadSafety First Other Tips Care & MaintenanceRoof Strengthening heavy snow load Kits AccessoriesThis WAS Left Blank Intentionally This WAS Left Blank Intentionally 97 1/2 47m FoundationFoundation For Your Building Anchoring Down The Building AnchoringHardware Parts List Assembly by Key No Floor Frame Assemblies StepPlace the front floor frames as Overlap the rear floor frames asOverlap the rear wall channel Frame AssembliesPlace the side wall angle, back Roof Beam AssemblyUsing the door track splice Door Track AssemblyFloor Frame Position a front corner panel at CornersPosition the rear corner panels at Frames Fasten the door track assemblyFasten the rear wall angle as Fasten the rear wall channel asWall Panels Door Jamb Gable Assemblies Join the left and right gables Gables/BracesRoof Beams If a Roof Beef-Up Kit was Right Roof PanelFront RoofAssemblyRidge Cap Roof Trim Hold the vertical door brace Door AssemblyPut a horizontal door brace onto Attach the lower door guidesRepeat steps 1 through 3 for Left door Door Installation & AdjustmentWL86-A EH86-ALM86 ML86-A SA8662-A VL8662-A

Step 16

Roof Trim