Arrow Plastic LM86 Door Assembly, Hold the vertical door brace, Put a horizontal door brace onto

	Step 17	● Parts Needed For ●	● 10478 Right and Left Doors (2)
		Door Assembly	● 10498 Horizontal Door Brace (4)
			● 6278 Vertical Door Brace (2)
	P30
The steps on this page tell how to
assemble the right door. You will
perform exactly the same procedures
for the left door. Each bolt and screw
in the door requires a washer.
Proceed as follows:			66045
		10498
1 Attach the handle to the door with
		6278	66045
2 bolts and nuts as shown.

66382

66382	10478 Right Door	STEP
	10478 Left Door	1

10498

2 Hold the vertical door brace

against the center of the inside sur- face of the door and turn the screw to

hold the vertical door brace in place. 6278 Fasten to door above and below

center connection using 2 screws.

3 Put a horizontal door brace onto

the top edge and bottom edge and fasten with 1 bolt in the center.

	STEP			STEP
	2			3		10498
4 Attach the lower door guides and
			END VIEW
bolts as shown.
			SHOWING:
5 Repeat steps 1 through 4 for the				Horizontal
				Door Brace Door
left door.					Washer
	STEP	66382
	4				Guide
30