Arrow Plastic VL8662-A, WL86-A, LM86, EH86S, EH86-A Frame Assemblies, Overlap the rear wall channel

Page 15

Step 2	● Parts Needed For ●
Step 2	Frame Assemblies
B15

●6615 Rear Wall Angle (2)

●9924 Rear Wall Channel (2)

The main frame pieces reinforce the walls. These pieces will later be in- stalled in the center and at the top edge of the rear wall. Proceed as follows:

1 Overlap the rear wall channel

9924

Rear Wall Channel

94 5/8" 2,40m

9924

pieces as shown in the figure and fasten the two pieces together with one bolt in the center hole (three holes will align).

2 Overlap the rear wall angle pieces

as shown in the figure and fasten them together with one bolt in the center hole.

3 Set the assemblies aside. You will

use them later.

STEP

1

Rear Wall Angle 94 5/8" 2,40m

6615

6615

STEP

2

Rear Wall Channel

94 5/8" 2,40m

Rear Wall Angle 94 5/8" 2,40m

STEP

3

15

Image 15

Contents EH86S Before YOU Begin Required Eye Goggles No Phillips Screwdriver Plan AheadSafety First Other Tips Care & MaintenanceRoof Strengthening heavy snow load Kits AccessoriesThis WAS Left Blank Intentionally This WAS Left Blank Intentionally Foundation Foundation For Your Building97 1/2 47m Anchoring Down The Building AnchoringHardware Parts List Assembly by Key No Overlap the rear floor frames as StepFloor Frame Assemblies Place the front floor frames asOverlap the rear wall channel Frame AssembliesPlace the side wall angle, back Roof Beam AssemblyUsing the door track splice Door Track AssemblyFloor Frame Corners Position the rear corner panels atPosition a front corner panel at Fasten the rear wall channel as Fasten the door track assemblyFrames Fasten the rear wall angle asWall Panels Door Jamb Gable Assemblies Join the left and right gables Gables/BracesRoof Beams If a Roof Beef-Up Kit was Right Roof PanelFront RoofAssemblyRidge Cap Roof Trim Attach the lower door guides Door AssemblyHold the vertical door brace Put a horizontal door brace ontoRepeat steps 1 through 3 for Left door Door Installation & AdjustmentEH86-A LM86 ML86-A SA8662-A VL8662-AWL86-A