Husqvarna Rider 155 manual Safety Instructions, General use

Page 10

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

WARNING!

The inserted symbol means that important safety instructions need to be observed. It applies to your safety.

General use

Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

Only allow the machine to be used by adults who are familiar with its use.

Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off.

Make sure animals and people maintain a safe distance from the machine.

Stop the machine if any one enters the working area.

Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.

Look out for the ejector and do not direct it towards anyone.

Stop the engine and prevent the engine from being started until you have cleaned the cutting unit or outlet channel.

Remember the operator is responsible for danger or accidents.

Never carry passengers. The machine is only intended to be used by one person.

Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles.

Slow before cornering.

Switch off the blades when you are not mowing.

8010-047

Read the operator’s manual before starting the machine.

6003-002

Clear the area of objects before mowing.

8010-052

Never carry passengers.

WARNING!

This machine can sever hands and feet as well as throw objects. Failure to observe the safety instructions can result in serious injuries.

8 – English

Image 10
Contents Rider EnglishSvenska Contents II. Slope operation Safe operation practices for ride-on mowersGeneral operation III. ChildrenTowing IV. ServiceTravel and transport on public roads Intended useTravel and transport on public roads IntroductionDear customer TowingGood service Serial numberExplanation of Symbols Starting InstructionPlacards Safety Instructions General useKeep children away from the area to be mowed Driving on slopes Proceed as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Presentation PresentationLocation of the controls Speed limiter Throttle and Choke leverParking brake Cutting unit Lift lever for cutting unitSeat Lever for adjustment of cutting heightFuelling Starting the engine DrivingBefore starting Cold engineWarm engine Driving the machine Cutting tips Stopping the engine Release leverDaily Maintenance interval MaintenanceMaintenance schedule HoursFront hood Removal of the machine hoodsEngine hood Right-hand fenderAdjusting the brake Checking and adjustment of the steering wiresPoorly adjusted brakes can result in reduced braking power Adjusting the throttle wire Replacement of the fuel filterService of the air filter Ignition system BatteryFitting the wrong spark plug type can damage the engine Inspecting the safety system Checking the tyre pressure Main fuseCheck the engine’s cooling air intake Fitting the cutting unit Observe caution to avoid trapping your handRemoving the cutting unit 6017-216 Adjusting the parallelism of the cutting unit Checking the cutting unit’s parallelismReplacing the cutting unit belt Service position for cutting unit Placing in service position6017-221 6017-222 8009-122 6017-223 Restoring from service position Checking the blades Replacing the break-pin Removal of BioClip plug CombiChanging the oil LubricationCheck the engine’s oil level Dip stick must not be screwed downCheck the transmission’s oil level Lubricating the belt adjusterChange of oil filter General lubricationTrouble Shooting Schedule Problem ProcedureWinter storage ServiceStorage CoverTechnical Data Service Journal Work done Date, mileage, stamp, signService Journal ´+H-¶5c¨ English 114 01