Husqvarna Rider 155 manual Contents

CONTENTS

Operator’s Manual for

Rider 155

Safety rules for USA	2	Adjusting the brake	25
Introduction	4	Adjusting the throttle wire	26
Driving and transport on public roads	4	Service of air filter	27
Towing	4	Battery	28
Intended use	4	Ignition System	28
Serial number	5	Inspection of the safety system	29
Explanation of symbols	6	Main fuse	30
Placards	7	Checking the tyre pressure	30
Safety instructions	8	Checking the engine’s cooling air intake	30
General Use	8	Fitting the cutting unit	31
Driving on Slopes	10	Removing the cutting unit	32
Children	11	Checking and adjustment of cutting unit’s
Maintenance	11	ground pressure	33
Transport	12	Checking the parallelism of the cutting unit ...	34
Presentation	14	Adjusting the parallelism of the cutting unit ....	34
Location of the controls	14	Replacing the cutting unit belt	35
Throttle/Choke lever	15	Service position for cutting unit	36
Speed limiter	15	Checking the blades	39
Parking brake	15	Replacing the break-pin	40
Cutting unit	16	Removal of BioClip plug	40
Lift lever for cutting unit	16	Lubrication	41
Lever for adjustment of cutting height	17	Checking the engine’s oil level	41
Seat	17	Changing the oil	41
Fuelling	17	Change of oil filter	42
Driving	18	Checking the transmission’s oil level	42
Before starting	18	Lubricating the belt adjuster	42
Starting the engine	18	General lubrication	42
Driving the machine	20	Trouble shooting schedule	43
Cutting tips	21	Storage	44
Stopping the engine	22	Winter storage	44
Release lever	22	Cover	44
Maintenance	23	Service	44
Maintenance schedule	23	Technical data	45
Removal of the machine hoods	24	Service journal	46
Checking and adjusting the steering wires ....	25

IMPORTANT INFORMATION

Read carefully through the Operator’s manual so that you know how to use and maintain the Rider before you use it.

For service measures other than those described in this manual, please contact an authorised dealer that provides parts and service.

English – 1