Husqvarna R120S Checking the blades, Fitting the cutting head, Damage or severe wear. Replace

Page 24

Maintenance

Fitting the cutting head

1 Place the belt under the stay of the cutting deck.

2Make sure the lifting lever comes above the cutting deck grip.

3Fit the cutting deck's pipe together with the deck frame's pipe.

4Push the cutting deck in and make sure the guide bolts fit into the grooves on the deck frame, one on each side.

5 Fit the cutting deck lock.

6 Grab the pipes and push the deck in.

7 Push the deck until you feel the pipes touch bottom.

8 Fit the belt according to the picture.

9 Tension the belt with the belt adjuster.

10Fit the front cover.

11Set the cutting height control to one of the positions 1-5

Checking the blades

To achieve the best mowing results it is important that the blades are undamaged and well-sharpened.

Check that the blades’ attachment screws are tight.

•Put the unit in the service position, see Service position for the cutting unit.

IMPORTANT INFORMATION

Replacing or sharpening the blades should be conducted by an authorised service workshop.

The blades should be balanced after sharpening.

Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service centre assess whether the blade can be sharpened or must be replaced.

!

WARNING! Do not use blades that are

cracked, chipped, or otherwise show signs

of damage or severe wear. Replace the

 

blades. The risk increases if the blades are

 

poorly balanced.

24 – English

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 120S Contents Introduction Service journal Pre-delivery serviceAfter the first 8 hours KEY to Symbols SymbolsAmerican Standard Safety Precautions Safety instructions for ride-on mowersImportant Safe Practices for Ride-on Mowers IV. Towing Safety Instructions Safety instructionsGeneral use Driving on slopes This is what you doMaintenance ChildrenTransport What is WHAT? Location of the controlsPresentation PresentationCutting unit Cutting height adjustment lever Exercise care and refuel outdoors see safety instructionsSeat FuelingDriving Before startingStart the engine Starting the engine with a weak battery Connecting the jump leadsDriving the Rider Remove the cables in the reverse orderCutting tips Stop the engineOther objects which can be thrown out by the blades Maintenance Maintenance scheduleMaintenance Daily maintenance At least once Before starting Interval in hoursCleaning Removing of the machine hoodsChecking and adjusting the steering wires Adjusting the P-brakeAdjusting the throttle wire Replacement of fuel filter Replacing the air filterChecking the fuel pump’s air filter Check the safety system Checking the Tire PressureIgnition system FusesService position for the cutting unit Checking the blades Fitting the cutting headDamage or severe wear. Replace Poorly balancedLubrication Checking the engine’s oil levelReplacing the engine oil Lubricating the front wheel bearingsTroubleshooting schedule Service StorageWinter storage Technical Data Sommaire SommaireService professionnel Cher clientConduite et transport sur la voie publique RemorquageService de livraison Journal d’entretienAprès les 8 premières heures Explication DES Symboles SymbolesConsignes DE Sécurité Standard Américaines Consignes GénéralesIII. Enfants Instructions DE Sécurité Instructions de sécuritéUtilisation générale Conduite dans les pentes Procéder de la manière suivanteEnfants EntretienNe jamais effectuer de réglages avec le moteur en marche Emplacement des commandes Quels Sont LES COMPOSANTS?Présentation PrésentationUnité de coupe Commande de débrayage SiègeRemplissage de carburant Levier de réglage de la hauteur de coupeConduite Avant le démarrageDémarrer le moteur Démarrage d’un moteur avec batterie faible Conduite de la tondeuse autoportéeRaccordement des câbles de démarrage Retirer les câbles dans l’ordre inverseConseils pratiques pour tondre Arrêt du moteurEntretien Schéma d’entretienEn heures Nettoyage Contrôle et réglage des câbles de directionRéglage du frein Réglage du câble d’accélérationChangement du filtre à air Changement de l’huile moteurContrôle du filtre à air de la pompe d’alimentation Remplacement de la bougie Vérification de la pression des pneusSystème d’allumage FusiblesVérification de la prise d’air de refroidissement du moteur Position d’entretien du groupe de coupeMontage de l’unité de coupe Contrôle des couteaux Remplacement de l’huile moteur GraissageContrôle du niveau d’huile du moteur Graissage des paliers des roues avant Graissage généralPlan de recherche de pannes Remisage Remisage hivernalCaractéristiques Techniques MoteurSystème électrique Unité de coupeIndice ÍndiceIntroduccion Diario de servicio Servicio de entregaDespués de las 8 primeras horas Aclaracion DE LOS Simbolos SímbolosInstrucciones de seguridad para cortacéspedes Importante Prácticas de uso seguro para cortacéspedesIV. Remolque Instrucciones DE Seguridad Instrucciones de seguridadUso general Uso en pendientes Proceda de esta formaNiños MantenimientoTransporte ¿QUE ES QUE? Ubicación de los mandosPresentación PresentaciónMando de desacoplamiento Asiento RepostajePalanca de ajuste de la altura de corte Manejo Antes del arranqueArranque el motor Arranque del motor con batería poco cargada Conexión de cables de arranque auxiliarQuite los cables en orden inverso Consejos para el corte Detenga el motorMantenimiento Esquema de mantenimientoMantenimiento Mantenimiento diario Mínimo una Intervalo de Vez al añoLimpieza Desmontaje de las cubiertas de la máquinaControl y ajuste de los cables de dirección Control del freno Ajuste del cable del aceleradorCambio del filtro de aire Cambio del filtro de combustible Revisión del filtro de aire de la bomba de combustibleControl de la presión de los neumáticos Sistema de encendido Control del sistema de seguridadCambio de la bujía Control de la toma del aire refrigerante Posición de servicio del equipo de corteMontaje de la unidad de corte Revisión de las cuchillas Lubricación Verificación del nivel de aceite del motorCambio del aceite del motor Lubricación de cojinetes de las ruedas delanterasTabla de localización de fallos Almacenaje Almacenamiento invernalServicio Dimensiones Datos TecnicosElektrische Anlage TransmisiónPage Page 1155510-49

R120S specifications

The Husqvarna R120S is a robust and versatile robotic lawn mower, designed for homeowners who demand efficiency and convenience in lawn care. This innovative machine combines advanced technology with user-friendly features to deliver an exceptional mowing experience.

At the core of the R120S's performance is its ability to navigate complex garden layouts with ease. Equipped with advanced navigation software, the mower can efficiently map its working area, allowing it to maneuver around obstacles and cover every inch of your lawn. It is capable of managing areas up to 600 square meters, making it an ideal choice for medium-sized gardens.

One of the defining characteristics of the Husqvarna R120S is its cutting technology. The mower features a three-blade cutting system that provides a clean and precise cut, promoting healthier grass growth. The adjustable cutting height allows users to customize the mowing length, ensuring that the lawn is maintained to their preference. The blades are designed to finely chop the grass clippings, which naturally fertilizes the lawn as they decompose.

The R120S is also equipped with weather-resistant features, enabling it to handle various outdoor conditions. It can operate in light rain and is built to withstand the rigors of outdoor use. The intelligent sensors ensure that the mower returns to its charging station when it detects rain, ensuring safety and longevity of the device.

User convenience is further enhanced by the mower's smartphone compatibility. Owners can easily control and monitor their machine through the Husqvarna app. This feature allows users to schedule mowing sessions, track the mower's location, and even receive notifications about its status, all from the palm of their hand. Moreover, the mower operates quietly, so you can enjoy your outdoor living spaces without disruption.

Safety is paramount in Husqvarna's design philosophy. The R120S features lift and tilt sensors that immediately stop the blades if the mower is lifted or tilted, preventing accidents. Its robust construction ensures that the mower can handle various terrains, including slopes up to 25 degrees.

In conclusion, the Husqvarna R120S robotic lawn mower is a state-of-the-art solution for efficient lawn maintenance. Its combination of smart navigation, reliable cutting technology, weather resistance, user-friendly app features, and safety measures makes it an excellent investment for any homeowner looking to simplify their gardening routine.
Top Page Image Contents