Husqvarna R120S manuel dutilisation IV. Towing

Page 7

AMERICAN STANDARD SAFETY PRECAUTIONS

IV. TOWING

•

1.Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.Follow the manufacturer’s recommendation for weight limits for towed equipment and towing on slopes.

3.Never allow children or others in or on towed equipment.

4.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Travel slowly and allow extra distance to stop.

V. SERVICE

SAFE HANDLING OF GASOLINE:

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

1.Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

2.Use only an approved gasoline container.

3.Never remove gas cap or add fuel with the engine running.

4.Allow engine to cool before refueling.

5.Never fuel the machine indoors.

6.Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliances.

7.Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

8.Remove gas powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

9.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until the fueling is complete. Do not use a nozzle lock open device.

10.If fuel is spilled on clothing, change clothing immediately.

11.Never overfill fuel tank. Replace gas cap and tighten securely.

GENERAL SERVICE:

1.Never operate machine in a closed area.

2.Keep all nuts and bolts tight to be sure the equipment is in safe working condition.

3.Never interfere with the intended function of a safety device or reduce the protection provided by a safety device. Check their proper operation regularly

4.Keep machine free of grass, leaves, or other debris build up. Clean up oil or fuel spillage and remove any fuel soaked debris. Allow machine to cool before storing.

5.If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting.

6.Never make any adjustments or repairs with the engine running.

7.Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary.

8.Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

9.Check brake operation frequently. Adjust and service as required.

10.Maintain or replace safety and instruction labels, as necessary.

English – 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 120S Contents Introduction Pre-delivery service Service journalAfter the first 8 hours Symbols KEY to SymbolsSafety instructions for ride-on mowers American Standard Safety PrecautionsImportant Safe Practices for Ride-on Mowers IV. Towing Safety instructions Safety InstructionsGeneral use This is what you do Driving on slopesChildren MaintenanceTransport Location of the controls What is WHAT?Presentation PresentationCutting unit Fueling Cutting height adjustment leverExercise care and refuel outdoors see safety instructions SeatBefore starting DrivingStart the engine Remove the cables in the reverse order Starting the engine with a weak batteryConnecting the jump leads Driving the RiderStop the engine Cutting tipsOther objects which can be thrown out by the blades Interval in hours MaintenanceMaintenance schedule Maintenance Daily maintenance At least once Before startingRemoving of the machine hoods CleaningAdjusting the P-brake Checking and adjusting the steering wiresAdjusting the throttle wire Replacing the air filter Replacement of fuel filterChecking the fuel pump’s air filter Fuses Check the safety systemChecking the Tire Pressure Ignition systemService position for the cutting unit Poorly balanced Checking the bladesFitting the cutting head Damage or severe wear. ReplaceLubricating the front wheel bearings LubricationChecking the engine’s oil level Replacing the engine oilTroubleshooting schedule Storage ServiceWinter storage Technical Data Sommaire SommaireRemorquage Service professionnelCher client Conduite et transport sur la voie publiqueJournal d’entretien Service de livraisonAprès les 8 premières heures Symboles Explication DES SymbolesConsignes Générales Consignes DE Sécurité Standard AméricainesIII. Enfants Instructions de sécurité Instructions DE SécuritéUtilisation générale Procéder de la manière suivante Conduite dans les pentesEntretien EnfantsNe jamais effectuer de réglages avec le moteur en marche Quels Sont LES COMPOSANTS? Emplacement des commandesPrésentation PrésentationUnité de coupe Levier de réglage de la hauteur de coupe Commande de débrayageSiège Remplissage de carburantAvant le démarrage ConduiteDémarrer le moteur Retirer les câbles dans l’ordre inverse Démarrage d’un moteur avec batterie faibleConduite de la tondeuse autoportée Raccordement des câbles de démarrageArrêt du moteur Conseils pratiques pour tondreSchéma d’entretien EntretienEn heures Contrôle et réglage des câbles de direction NettoyageRéglage du câble d’accélération Réglage du freinChangement de l’huile moteur Changement du filtre à airContrôle du filtre à air de la pompe d’alimentation Fusibles Remplacement de la bougieVérification de la pression des pneus Système d’allumagePosition d’entretien du groupe de coupe Vérification de la prise d’air de refroidissement du moteurMontage de l’unité de coupe Contrôle des couteaux Graissage Remplacement de l’huile moteurContrôle du niveau d’huile du moteur Graissage général Graissage des paliers des roues avantPlan de recherche de pannes Remisage hivernal RemisageUnité de coupe Caractéristiques TechniquesMoteur Système électriqueÍndice IndiceIntroduccion Servicio de entrega Diario de servicioDespués de las 8 primeras horas Símbolos Aclaracion DE LOS SimbolosImportante Prácticas de uso seguro para cortacéspedes Instrucciones de seguridad para cortacéspedesIV. Remolque Instrucciones de seguridad Instrucciones DE SeguridadUso general Proceda de esta forma Uso en pendientesMantenimiento NiñosTransporte Ubicación de los mandos ¿QUE ES QUE?Presentación PresentaciónMando de desacoplamiento Repostaje AsientoPalanca de ajuste de la altura de corte Antes del arranque ManejoArranque el motor Conexión de cables de arranque auxiliar Arranque del motor con batería poco cargadaQuite los cables en orden inverso Detenga el motor Consejos para el corteVez al año MantenimientoEsquema de mantenimiento Mantenimiento Mantenimiento diario Mínimo una Intervalo deDesmontaje de las cubiertas de la máquina LimpiezaControl y ajuste de los cables de dirección Ajuste del cable del acelerador Control del frenoCambio del filtro de aire Revisión del filtro de aire de la bomba de combustible Cambio del filtro de combustibleControl de la presión de los neumáticos Control del sistema de seguridad Sistema de encendidoCambio de la bujía Posición de servicio del equipo de corte Control de la toma del aire refrigeranteMontaje de la unidad de corte Revisión de las cuchillas Lubricación de cojinetes de las ruedas delanteras LubricaciónVerificación del nivel de aceite del motor Cambio del aceite del motorTabla de localización de fallos Almacenamiento invernal AlmacenajeServicio Transmisión DimensionesDatos Tecnicos Elektrische AnlagePage Page 1155510-49

R120S specifications

The Husqvarna R120S is a robust and versatile robotic lawn mower, designed for homeowners who demand efficiency and convenience in lawn care. This innovative machine combines advanced technology with user-friendly features to deliver an exceptional mowing experience.

At the core of the R120S's performance is its ability to navigate complex garden layouts with ease. Equipped with advanced navigation software, the mower can efficiently map its working area, allowing it to maneuver around obstacles and cover every inch of your lawn. It is capable of managing areas up to 600 square meters, making it an ideal choice for medium-sized gardens.

One of the defining characteristics of the Husqvarna R120S is its cutting technology. The mower features a three-blade cutting system that provides a clean and precise cut, promoting healthier grass growth. The adjustable cutting height allows users to customize the mowing length, ensuring that the lawn is maintained to their preference. The blades are designed to finely chop the grass clippings, which naturally fertilizes the lawn as they decompose.

The R120S is also equipped with weather-resistant features, enabling it to handle various outdoor conditions. It can operate in light rain and is built to withstand the rigors of outdoor use. The intelligent sensors ensure that the mower returns to its charging station when it detects rain, ensuring safety and longevity of the device.

User convenience is further enhanced by the mower's smartphone compatibility. Owners can easily control and monitor their machine through the Husqvarna app. This feature allows users to schedule mowing sessions, track the mower's location, and even receive notifications about its status, all from the palm of their hand. Moreover, the mower operates quietly, so you can enjoy your outdoor living spaces without disruption.

Safety is paramount in Husqvarna's design philosophy. The R120S features lift and tilt sensors that immediately stop the blades if the mower is lifted or tilted, preventing accidents. Its robust construction ensures that the mower can handle various terrains, including slopes up to 25 degrees.

In conclusion, the Husqvarna R120S robotic lawn mower is a state-of-the-art solution for efficient lawn maintenance. Its combination of smart navigation, reliable cutting technology, weather resistance, user-friendly app features, and safety measures makes it an excellent investment for any homeowner looking to simplify their gardening routine.
Top Page Image Contents