Husqvarna Changing the Automower PIN Code: Step-by-Step Guide

4. USE

3.Turn the knob to the required position. The selected position is the marking on the knob that aligns with the arrow on the body.

• Turn clockwise to raise the cutting height.

• Turn anticlockwise to lower the cutting height.

3012-253

4.Close the cover. Ensure that the catch button locks.

4.6 Changing the PIN code

To change the PIN code on the mower:

1.Connect the loop generator/charger charging cable to the mower's charger contact. At most the mower may be two metres from the working area's boundary wire and the loop generator/charger must be connected to the mains supply.

2.Open the control panel cover by pressing the STOP button. Set the main switch to the ON position.

3.State the current PIN code, confirm by pressing the YES button.

4.The yellow indicator lamp PIN code should now be lit with a steady light.

5.Press and hold the number 8 key on the control panel for 2 seconds.

6.The yellow indicator lamp PIN code should now flash.

7.Select and enter a new four digit PIN code. All combinations except 0000 are permitted.

8.Press the YES button.

9.Confirm the selected PIN code by re-entering the PIN code.

2 m

3012-758

3012-797

3012-786

30 - English