Husqvarna 210 C manual Main switch, Indicator lamps

Page 32

5. CONTROL PANEL

5.3 Main switch

4.Set the main switch in the ON position to start Automower.

Set the main switch in the OFF position when you are not using the mower or if you want to work on the blade disc.

When the main switch is set in the OFF position the motors on the mower cannot start.

5.4 Indicator lamps

The indicator lamps indicate the status of the mower. If all the lamps are out, the mower is in sleep mode. Start the mower again by switching the main switch off and on.

5.PIN code:

The lamp is lit with a steady light: The PIN code has been entered and the mower is ready to start. Star the mower by closing the cover.

The lamp flashes: The PIN code has not been entered. Enter the PIN code using the numerical buttons followed by the YES button.

6.Battery:

The lamp is out: The mower is not charging and it is sufficiently charged to mow.

The lamp is lit with a steady light: Mower charging.

The lamp flashes: The mower needs to charge.

7.Fault:

The lamp is out: No fault.

The lamp flashes or is lit with a steady light: A fault means the mower can not start, see 8.1 Fault messages on page 41.

4

3012-746

5

6

7

3012-780

English - 33

Image 32
Contents Husqvarna Automower 210 C OPERATOR’S Manual Table of Contents Table of Contents Introduction Safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Numbers in the picture correspond toMowing technique Function of AutomowerCapacity 3012-422 Working method One Automower in several gardens Movement patternInstallation Carry out the installation in the following stepsInstallation of the loop generator/charger PreparationsCharging the battery Installation and connecting the loop generator/chargerInstallation of the boundary wire Best position for the boundary wire10 cm 30 cmBoundaries for the working area Boundaries within the working area Secondary areas SlopesLaying out the boundary wire 3012-745 3012-535 Connecting the boundary wire Checking the installation Linking Automower to the loop generator/chargerStopping Automower UseStarting Automower Restart Switching off AutomowerAdjusting the cutting height Changing the PIN code Sounds Sound SignificanceNumbers Control panelSelect Main switch Indicator lampsProposals for installation Garden exampleGarden with steep inclines can be mown Maintenance BatteryService CleaningWinter storage AutomowerDo not use running water when cleaning Underframe and blade discChassis WheelsReplacing the blades Body3012-260 Trouble shooting Fault messagesTrouble Shooting Fault symptom Data Automower 210 C Technical dataEnvironmental Information EU declaration of conformity EU Declaration of Conformity only applies to EuropeEU Declaration of Conformity Index Trouble Shooting Guide symptom 115 03