5. CONTROL PANEL
5. Control panel
The control panel on Husqvarna Automower™ consists of indicator lamps and a keypad. All information is shown through the indicator lamps and all input is done using the buttons.
The control panel consists of three groups of buttons: select, numbers and main switch, and indicator lamps..
5.1 Select
1.Cancel:
•Press to interrupt an ongoing input or to reset the mower when a fault message is shown.
2.YES:
•Press to confirm the entered PIN code.
5.2 Numbers
3.Press to state the PIN code.
Also use the special command: See 4.6 Changing the PIN code on page 30.
1 | 2 |
32 - English