2. PRESENTATION
2. Presentation
This chapter contains information you should be aware of when planning the installation.
An installation of Husqvarna Automower™ comprises three main components:
Automower, an automatic lawn mower that mows the lawn by moving in an irregular pattern. The mower is powered by a
Loop generator/charger.
The loop generator/charger has two functions:
•To send control signals along the boundary wire.
•To charge the battery in Automower.
The loop generator/charger is connected to a 230 V wall socket via an integrated power cord and to the mower via a 2 m long low voltage cable.
Wire, laid in a loop around Automower’s working area. The boundary wire is laid around the edges of the lawn and around objects and plants that the mower must not run into.
The wire supplied with the installation is 150 m long. If this is not sufficient more wire can be purchased, with a connector, and spliced onto the existing wire.
10 - English