Husqvarna 210 C manual Replacing the blades, Body

7. MAINTENANCE

Body

Use a damp, soft sponge or cloth to clean the body. If the body is very dirty it may be necessary to use a soap solution or washing-up liquid.

7.5 Replacing the blades

WARNING

Always use originalblades and screws when replacing.

Only replacing the blades and reusing the screw can result in the screw wearing during mowing and shearing off. The blades can then be thrown out and cause serious injury.

There are three blades on Automower, which are screwed into the blade disc. The blades have two edges to ensure a longer service life. The blade disc rotates alternately to the left and alternately to the right.

All three blades and screws must be replaced at the same time to obtain a balanced mowing system.

There are two blade variants with different characteristics to choose from as accessories. Contact your dealer for further information.

To replace the blades:

1.Set the main switch to the OFF position.

2.Wear protective gloves.

3.Turn Automower upside down.

4.Rotate the skid plate so that its hole aligns with the screw for the blade.

3012-783

3012-422

3012-749

3012-272

English - 39