Husqvarna 210 C manual Fault symptom

8. TROUBLE SHOOTING

8.2 Fault symptom

If your Automower does not work correctly, follow the trouble shooting guide below. If the fault persists; contact your dealer.

Symptom	Cause	Action
Uneven mowing	Automower works too few hours per	Increase the mowing time.
results	week.
	Working area too large.	Try limiting the working area or
		extending the mowing time.
	Dull blades.	Replace all the blades and screws so
		that the rotating parts are balanced.
	Long grass in relation to the set	Increase the cutting height and then
	cutting height.	successively lower.
	Accumulation of grass by the blade	Check that the skid plate and blade
	disc or around the motor shaft.	disc rotate easily. If not, the skid plate
		and perhaps the blade disc must be
		removed and the grass and foreign
		objects removed. See 7.4 Cleaning
		on page 39.
Automower vibrates	Unbalanced blade disc or damaged	Inspect the blades and screws and
	blades.	replace them if necessary.
The mower mows for	Grass or a foreign object is blocking	Dismantle and clean the skid plate
shorter periods than	the blade disc or skid plate.	and blade disc.
usual
	This behaviour is normal in high	No action.
	temperatures (gradually increasing
	above 25°C).
	The battery is spent.	Contact your dealer to check and
		replace the battery.

English - 43