3. INSTALLATION
IMPORTANT INFORMATION
Pay particular attention not to cross the boundary wire in towards the loop generator/charger.
Joining the boundary wire
If the boundary wire is not long enough and needs to be spliced: Use original solderless coupler. It is waterproof and gives a reliable electrical connection.
To splice: Insert both cable ends in the coupler. Now press down the button on top of the connector fully. Use a pair of pliers or the like, as the button on the connector is difficult to press down by hand.
IMPORTANT INFORMATION |
|
Twisted cables, or a screw terminal |
|
| |
is not a satisfactory splice. Soil moisture will |
|
cause the conductors to oxidise and after a |
|
while result in a broken circuit. |
|
English - 25