3Com 3CR990 manual Click Have Disk

Multiple NICs 37

Windows NT 4.0 To install multiple NICs:

1Physically install all of the NICs in your PC and connect each NIC to the network.

2Turn the PC power on and start Windows NT.

3Double-click the My Computer icon, then the Control Panel icon, and then the Network icon.

The Network screen appears.

4Select the Adapters tab, and then click Add. The Select Network Adapter screen appears.

5Click Have Disk.

6Insert the EtherCD in the CD-ROM drive, and then click OK.

7Make sure that the correct path to your CD-ROM drive appears in the entry box, and then click OK.

The Select OEM Option screen appears with the name of one of the NICs selected. Only one NIC appears on this screen.

8Make sure that the correct NIC is selected, and then click OK. Files are copied.

9Close the Network screen.

If you are prompted for network information, enter the requested information.

10Follow the prompts on the screen to install the NIC driver and software. After the NIC driver is installed, restart the PC.

NOTE: Depending on the manufacturer of your PC, after the PC restarts, you may have to repeat steps 3 through 11 for each additional NIC to be installed.

The NICs are installed and operational.