40CHAPTER 5: NETWARE DRIVERS
3Add the following two lines to the AUTOEXEC.NCF file:
load 3c99x.lan slot=<slot> NAME=<name> FRAME=<frametype> bind ipx to <name> net=<number>
NOTE: If you copy the NLM files to a different directory, you must specify the path in the preceding load statement.
4Save and exit the file, and then restart the server.
NetWare 4.10, To upgrade the driver in a NetWare 4.10, 4.11, or 5.0 server:
4.11, and 5.0
1Obtain the MSM.NLM, ETHERTSM.NLM, and NBI.NLM files from Novell and copy them to the directory on your hard disk where other NLM files are located. This is typically in the sys:system directory. You need a NetWare client system to copy the NLM files to the server.
2Insert installation diskette 2 in drive A.
3At the server prompt, type: load inetcfg, and then press Enter. The Internetworking Configuration screen appears.
4In the displayed menu, select Boards, and then press Enter.
5Press Insert.
A list of currently installed drivers appears.
6Press Insert again.
The New Driver dialog box appears.
7Specify the directory: a:\nwserver\3c99x.lan, and then press Enter. An updated list of installed drivers appears.
8Select 3C99x, and then press Enter. You are prompted to name the NIC.
9For example, enter: 3c99x_1, and then press Enter.
You are prompted for the slot number. For information on how to verify the slot number
Go to: Verifying the PCI Slot Number.
10Enter the slot number, and then press Enter.
11Press Esc, Enter (to save), and then Esc.
The Internetworking Configuration screen appears.
12Select Bindings, and then press Enter.
The configured protocols for installed NICs appears. (This list will be empty if no protocols are currently bound to the NIC.)
