3Com Switch 8800 Configuration Guide Chapter 21 BGP Configuration
21-24
By default, the configured confederation is consistent with RFC1965.
21.2.17 Clearing BGP Connection
After the user changes BGP policy or protocol configuration, they must cut off the
current connection so as to enable the new configuration.
Perform the following configuration in user view.
Table 21-40 Clear BGP connection
Operation Command
Clear the connection between BGP
and the specified peers reset bgp peer-address [ flap-info ]
Clear all connections of BGP reset bgp all
Clear the connections between the
BGP and all the members of a group reset bgp group group-name
21.2.18 Refreshing BGP Routes
It is required to re-compute associated route information when BGP routing policy
changes.
Perform the following configuration in user view.
Table 21-41 Refresh BGP routes
Operation Command
Refresh general BGP routes refresh bgp { all | peer-address | group
group-name } { import | export }
The import keyword means to refresh the routes learned from the peers and the
export keyword means to refresh routes advertised to the peers.
21.3 Displaying and Debugging BGP After the above configuration, execute the display command in any view to display the
running of the BGP configuration, and to verify the effect of the configuration. Execute
the reset command in user view to clear the statistics of the configuration. Execute the
debugging command in user view to debug the configuration. Execute the reset
command in user view to reset the statistic information of BGP.