3Com Switch 8800 Configuration Guide Chapter 37 BGP/MPLS VPN Configuration
37-26
II. Displaying IP routing table associated with vpn-instance
After the above configuration, you can execute display command in any view to
display the corresponding information in the IP routing tables related to vpn-instance,
and to verify the effect of the configuration.
Table 37-35 Display IP routing table associated with vpn-instance
Operation Command
Display IP routing table
associated with vpn-instance
display ip routing-table vpn-instance
vpn-instance-name [ [ip-address ] [ verbose ] |
statistics ]
III. Displaying vpn-instance related information
After the above configuration, executing the display command in any view can display
the vpn-instance related information, including its RD, description, the interfaces
associated with it, and so on. You can view the information to verify the configuration
effect.
Table 37-36 Display vpn-instance related information
Operation Command
Display the vpn-instance related
information, including its RD, description,
the interfaces associated with it, and so on.
display ip vpn-instance
[ vpn-instance-name | verbose ]
IV. Debugging information concerning processing BGP
Execute debugging command in user view for the debugging of the related
vpn-instance information.
Table 37-37 Enable the debugging for processing BGP
Operation Command
Enable the debugging for
processing BGP
debugging bgp { all | event | normal | { keepalive |
mp-update | open | packet | update | route-refresh |
update } [ receive | send |] [ verbose ] }
Disable the debugging
undo debugging bgp { {all | event | normal |
keepalive | mp-update | open | packet | update |
route-refresh } [ receive | send | verbose ] } { all |
event | normal | update }