3Com Switch 8800 Configuration Guide Chapter 43 File System Management
43-10
43.3.5 Displaying and Debugging FTP Server After the above configuration, execute display command in any view to display the
running of the FTP Server configuration, and to verify the effect of the configuration.
Table 43-15 Display and debug FTP Server
Operation Command
Display FTP server display ftp-server
Display the connected FTP users. display ftp-user
The display ftp-server command can be used for displaying the configuration
information about the current FTP server, including the maximum amount of users
supported by FTP server and the FTP connection timeout. The display ftp-user
command can be used for displaying the detail information about the connected FTP
users.
43.3.6 Disconnecting an FTP User Perform the following configuration in system view.
Table 43-16 Disconnect an FTP user
Operation Command
Disconnect an FTP user. ftp disconnect user-name
As an additional function provided by Ethernet switch, FTP client is an application
module and has no configuration functions. The switch connects the FTP clients and
the remote server and inputs the command from the clients for corresponding
operations (such as creating or deleting a directory).
43.3.8 FTP Client Configuration Example I. Network requirements
The switch serves as FTP client and the remote PC as FTP server. The configuration
on FTP server: Configure an FTP user named as switch, with password hello and with
read & write authority over the Switch root directory on the PC. The IP address of a
VLAN interface on the switch is 1.1.1.1, and that of the PC is 2.2.2.2. The switch and
PC are reachable.