3Com Switch 8800 Configuration Guide Chapter 46 System Maintenance and Debugging
46-10
Switch information falls into three categories: log information, debugging information
and trap information. The info-center classifies every kind of information into 8 severity
or urgent levels. The log filtering rule is that the system prohibits outputting the
information whose severity level is greater than the set threshold. The more urgent the
logging packet is, the smaller its severity level is. The level represented by
“emergencies” is 1, and that represented by “debugging” is 8. Therefore, when the
threshold of the severity level is “debugging”, the system will output all the information.
Definition of severity in logging information is as followed.
Table 46-12 Info-center-defined severity
Severity Value Description
emergencies 1 The extremely emergent errors
alerts 2 The errors that need to be corrected immediately.
critical 3 Critical errors
errors 4 The errors that need to be concerned but not critical
warnings 5 Warning, there might exist some kinds of errors.
notifications 6 The information should be concerned.
informational 7 Common prompting information
debugging 8 Debugging information
Notice: There is a slash between severity and digest.
7) Digest
The digest is abbreviation, it represent the abstract of contents.
Notice: There is a colon between digest and content. The digest can be up to 32
characters long.
46.5.2 Info-center Configuration Switch supports 7 output directions of information.
The system assigns a channel in each output direction by default. See the table below.
Table 46-13 Numbers and names of the channels for log output
Output direction Channel number Default channel name
Console 0 console
Monitor 1 monitor
Info-center loghost 2 loghost
Trap buffer 3 trapbuf