3Com Switch 8800 Configuration Guide Chapter 9 GARP/GVRP Configuration
9-6
Table 9-5 Set the GVRP registration type
Operation Command
Set GVRP registration type gvrp registration { normal | fixed |
forbidden }
Restore the default GVRP registration
type undo gvrp registration
By default, GVRP registration type is normal.
9.2.5 Displaying and Debugging GVRP
After the above configuration, execute the display command in any view to display the
running of GVRP configuration, and to verify the configuration.
Execute the debugging command in user view to debug the configuration of GVRP.
Table 9-6 Display and debug GVRP
Operation Command
Display GVRP statistics information display gvrp statistics [ interface
interface-list ]
Display GVRP global status information display gvrp status
Enable GVRP packet or event
debugging debugging gvrp { packet | event}
Disable GVRP packet or event
debugging undo debugging gvrp { packet |
event }
9.2.6 GVRP Configuration Example
I. Network requirements
To dynamically register and update VLAN information among switches, GVRP needs to
be enabled on the switches.
II. Network diagram
E3/1/1
Switch A Switch B
E4/1/1
Switch A Switch B
E3/1/1
Switch A Switch B
E4/1/1
Switch A Switch B
Figure 9-1 GVRP configuration example