3Com Switch 8800 Configuration Guide Chapter 45 Device management
45-1
Chapter 45 Device management 45.1 Device Management Overview
With the device management function, the Ethernet Switch can display the current
running state and event debugging information about the slots, thereby implementing
the maintenance and management of the state and communication of the physical
devices. In addition, there is a command available for rebooting the system, when
some function failure occurs.
45.2 Device Management Configuration
The main device management tasks for you are to check the status of the boards, CPU,
and the memory usage of the switch.
The following sections describe the configuration tasks for device management:
z Rebooting the Ethernet Switch
z Enabling the Timing Reboot Function
z Designating the APP Adopted on Next Booting
z Upgrading BootROM
z Setting Slot Temperature Limit
z Updating Service Processing Boards
45.2.1 Rebooting the Ethernet Switch
It would be necessary for users to reboot the Ethernet switch when failure occurs.
Perform the following configuration in user view.
Table 45-1 Reboot Ethernet switch
Operation Command
Root Ethernet switch reboot [ slot slot-no ]
45.2.2 Enabling the Timing Reboot Function
After you enable the timing reboot function on the switch, the switch will be rebooted on
the specified time.
Perform the following configuration in user view, and display schedule reboot
command can be performed in any view.