3Com Switch 8800 Configuration Guide Chapter 50 SSH Terminal Service
50-17
[SW8800] ssh client first-time enable
Access the remote server and perform operations.
z Employ RSA public key authentication mode, and start using the corresponding
encryption algorithm configured.
[SW8800] ssh2 10.165.87.136 22 perfer_kex dh_group1 perfer_ctos_cipher des
perfer_stoc_cipher 3des perfer_ctos_hmac md5 perfer_stoc_hmac md5
Please input the username: client003
Trying 10.165.87.136...
Press CTRL+K to abort
Connected to 10.165.87.136...
The Server is not autherncated.Do you continue access it?(Y/N):y
Do you want to save the server's public key?(Y/N):y
*********************************************************
* All rights reserved (1997-2004) *
* Without the owner's prior written consent, *
*no decompiling or reverse-engineering shall be allowed.*
*********************************************************
<SW8800>
Configure the client to authenticate the server for the first time.
<SW8800> sys
[SW8800] ssh client first-time enable
Access the remote server and perform operations.
50.2 SFTP Service 50.2.1 SFTP Overview
Secure FTP is established on SSH connections, which makes remote users able to
securely log in to the switch and perform file management and transfer operations such
as system upgrade, and thereby providing higher security for data transfer. At the same
time, since the switch can be used as a client, users can log in to remote devices to
transfer files securely.
50.2.2 SFTP Server Configuration
SFTP server configuration tasks are described in this section:
z Configuring the service type to be used
z Starting the SFTP server
I. Configuring the service type to be used
Use this configuration task to set the SSH service type to be used.
Perform the following configuration in system view.