3Com Switch 8800 Configuration Guide Chapter 50 SSH Terminal Service
50-18
Table 50-18 Configure the service type to be used
Operation Command
Configure the service type to be used ssh user username service-type
{ telnet | sftp | all }
Restore the default service type undo ssh user username service-type
By default, the service type is telnet.
II. Starting the SFTP server
Perform the following configuration in system view.
Table 50-19 Start the SFTP server
Operation Command
Start the SFTP server sftp server enable
Shut down the SFTP server undo sftp server enable
By default, the SFTP server is shut down.
50.2.3 SFTP Client Configuration The following table describes the SFTP client configuration tasks.
Table 50-20 SFTP client configuration tasks
Num Item Command Description
1 Enter system view <SW8800>
system-view –
2 Starting the SFTP client
[SW8800]
sftp ipaddr [ prefer_kex
{ dh_group1 |
dh_exchange_group } ]
[ prefer_ctos_cipher
{ des | 3des | aes128 } ]
[ prefer_stoc_cipher
{ des | 3des | aes128 } ]
[ prefer_ctos_hmac
{ sha1 | sha1_96 | md5 |
md5_96 } ]
[ prefer_stoc_hmac
{ sha1 | sha1_96 | md5 |
md5_96 } ]
Required