3Com DUA1750-2BAA01 33.4 Configuration Example

3Com Switch 8800 Configuration Guide Chapter 33 QoS Configuration
33-24
33.4 Configuration Example
33.4.1 Traffic Shaping Configuration Example
I. Network requirements
Set traffic shaping for the outbound queue 2 at the port GE7/1/8: maximum rate
500kbps, burst size 12k bytes.
II. Network diagram
GE7/1/8
GE7/1/1 GE7/1/2
VLAN2,
1.0.0.1/8 VLAN3, 2.0.0.1/8
PC1 PC2
GE7/1/8
GE7/1/1 GE7/1/2
VLAN2,
1.0.0.1/8 VLAN3, 2.0.0.1/8
PC1 PC2
Figure 33-6 Network diagram for QoS configuration
III. Configuration procedure
1) Enter Ethernet port view.
[SW8800] interface GigabitEthernet 7/1/8
[SW8800-GigabitEthernet7/1/8]
2) Set traffic shaping for the outbound queue 2 at the port: maximum rate 500 Kbps,
burst size 12 KB.
[SW8800-GigabitEthernet7/1/8] traffic-shape queue 2 500 12
33.4.2 Port Mirroring Configuration Example
I. Network requirements
Use one server to monitor the packets of two ports. R&D department is accessed from
the port GE3/1/1 and sales department from the port GE3/1/2. The server is connected
to the port GE3/1/8.