3Com Switch 8800 Configuration Guide Chapter 28 PIM-DM Configuration
28-6
Table 28-6 Configuring the maximum number of PIM neighbor on an interface
Operation Command
Configure the maximum number of PIM neighbor on an
interface pim neighbor-limit
limit
Restore the limit of PIN neighbor to the default value pim neighbor-limit
By default, the PIM neighbors on the interface are limited to 128.
If the number of PIM neighbors of an interface has exceeded the configured value by
the time of configuration, the existing PIM neighbors will not be deleted.
28.2.8 Clearing multicast route entries from PIM routing table
Perform the following configuration in user view.
Table 28-7 Clearing multicast route entries from PIM routing table
Operation Command
Clear multicast
route entries from
PIM routing table
reset pim routing-table { all | { group-address [ mask
{ group-mask | group-mask-length } ] | source-address [ mask
{ source-mask | source-mask-length } ] | { incoming-interface
{ interface-type interface-number | null } } } * }
28.2.9 Clearing PIM Neighbors
Perform the following configuration in user view.
Table 28-8 Resetting PIM neighbor
Operation Command
Clear PIM
neighbors reset pim neighbor { all | { neighbor-address | interface
interface-type interface-number } * }
After the above configuration, execute display command in any view to display the
running of PIM-DM configuration, and to verify the effect of the configuration.
Execute debugging command in user view for the debugging of PIM-DM.